+ Reply to Thread
Results 1 to 2 of 2

Thread: Any workaround for DS2760 Thermocouple Kit

  1. #1

    Default Any workaround for DS2760 Thermocouple Kit

    Hello

    Is there any workaround for DS2760 Thermocouple Kit for a BS2 ? I see mine isnt on the list.


    When using a BASIC Stamp microcontroller a BS2p series module is required. Supporting modules are BS2p24, BS2p40, BS2pe24 and BS2px24

    Thanks

    wiresalot

  2. #2

    Default Re: Any workaround for DS2760 Thermocouple Kit

    Searching the forums brought this up.
    The DS2480(b) is a chip that converts from RS232 to 1-Wire, and can only be used as a master.(It does in hardware what the BS2p's OWIN/OWOUT instructions does in software)
    and this from Mike Green
    The reason you can't find info on connecting 1-wire devices to a BS2 is that it doesn't work. The BS2 doesn't have the capability to do the necessary timing for the 1-wire protocol. It's possible to use an external serial to 1-wire converter like the DS2480B and Embedded Data Systems has a very nice finished serial to 1-wire adapter (www.embeddeddatasystems.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=HA7S&Categor y_Code=HA&Product_Count=4) that I've used in the past.

+ Reply to Thread

Similar Threads

  1. DS2760 Thermocouple Kit
    By Greg LaPolla in forum Propeller 1 Multicore Microcontroller
    Replies: 1
    Last Post: 03-02-2009, 12:21 PM
  2. DS2760 Thermocouple
    By True in forum BASIC Stamp
    Replies: 4
    Last Post: 10-15-2007, 12:19 AM
  3. DS2760 thermocouple
    By Rene in forum BASIC Stamp
    Replies: 5
    Last Post: 11-15-2006, 03:58 AM
  4. DS2760 Thermocouple
    By Rene in forum BASIC Stamp
    Replies: 1
    Last Post: 11-09-2006, 11:14 PM
  5. DS2760 Thermocouple Kit questions
    By Manuel in forum General Discussion
    Replies: 5
    Last Post: 04-06-2006, 11:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts