+ Reply to Thread
Results 1 to 5 of 5

Thread: PropScope

  1. #1

    Default PropScope

    Can someone provide more detail about the NTSC/PAL output of this new scope?ˇ For example, can it be used toˇgenerate a NTSC patternˇfor input into a FM transmitter andˇthenˇcompared to the video output of the recieverˇonˇthe scope for receiver tuning?

    I've checked the documentation and there appears to be very little information on what appears to be a quite capable product.ˇ For example, what is the maximum frequency sine wave that can be generated with he included expanson card?ˇ What are the specifications for the FFT mode.ˇ Any additional information would be appreciated.

    OMM
    ˇ
    Last edited by ForumTools; 10-02-2010 at 10:38 PM. Reason: Forum Migration

  2. #2
    Parallax Engineering

    Chris Savage's Avatar
    Location
    Rocklin, CA
    Posts
    12,581
    Blog Entries
    8

    Default

    Mike, I will contact the best person to answer these questions for you.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage

    Parallax Engineering
    50 72 6F 6A 65 63 74 20 53 69 74 65
    ˇ
    Last edited by ForumTools; 10-02-2010 at 10:38 PM. Reason: Forum Migration

  3. #3

    Default

    I just got one of these myself and am also curious what I can do with the NTSC output. Does it produce a real-time trace like a conventional oscope display? (I would just hook up a TV set to see, except I don't have one!)
    Last edited by ForumTools; 10-02-2010 at 10:38 PM. Reason: Forum Migration

  4. #4

    Default

    The TV/VGA out was added very late in the cycle. The current firmware uses all 8 cogs, without driving the TV. For now, if you really want to output something to the TV you'll have to do it yourself. The PropScope uses a Propeller running at 100MHz and the schematics are available on the Parallax site. What would people like to see?
    Hanno

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Co-author of the official Propeller Guide- available at Amazon
    Developer of ViewPort, the premier visual debugger for the Propeller (read the review here, thread here),
    12Blocks, the block-based programming environment (thread here)
    and PropScope, the multi-function USB oscilloscope/function generator/logic analyzer
    Last edited by ForumTools; 10-02-2010 at 10:38 PM. Reason: Forum Migration

  5. #5

    Default

    What I would *most* like to see is software for the PropScope that runs natively on the Mac... I am running it under VMware and while it works it often takes several seconds to display a changed signal. I'm not sure if that's all down to VMware or if that's just how the software works.

    That was the origin of my interest in the TV signal. I thought it might output something closer to a "real time" trace.
    Last edited by ForumTools; 10-02-2010 at 10:38 PM. Reason: Forum Migration

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts