Introducing MoCog an emulation of the Motorola 6809 microprocessor for the Propeller.
In the few slack moments I have nowadays I have been converting the ZiCog Z80 emulator into a 6809 emulator. As usual with me this is a very unfinished early release. There is a lot of code in place but very little is tested. So far it just about single steps its way through a short loop of
No flag setting is in place.
This should compile with BST or homespun for the Prop Demo Board if the following defines are set: "PropDemoBoard" and "SingleStep".
Just compile, download and watch the output in the terminal window of BST or ProTerminal or whatever. Hit any key to take single steps through the loop.
I have left Cluso's code for the TriBladeProp platform (external RAM) in place but It's best he reviews it I guess.
What's this for? No idea but I want to see CUBIX running on the Prop possibly followed by FLEX, SK*DOS and/or One MAn Unix (OMU).
Edit: 8 Jul 2009 Latest version is 0.5. All op-codes now in place. Runs a GCC compiled test program (See the ram_6809 area in mocog_demo.spin). Not many ops do any flag setting yet.
Edit: 14 Jul 2009. Latest version is 0.6. Changed to run a 6809 test program. All addressing modes are working. Most other ops not yet. But at least the tests run !!!
For me, the past is not over yet.
Post Edited (heater) : 7/14/2009 5:04:16 PM GMT