Acrylic enclosures for P2 EVAL - Available now

1235»

Comments

  • Cool! I am too. Ikea... some assembly gonna be required.

  • msrobotsmsrobots Posts: 3,070
    edited 2018-12-23 - 03:17:50
    Roy Eltham wrote: »
    potatohead, I have a "few" PPDBs. Snapped a couple up when they were deep discounted at end of life. I also have both of Mountain King's PPDB enclosures (the normal one and the one with room for the propscope under).
    I'll get you a pic later tonight, dealing with some xmas stuff right now.

    lucky you. I have just one and LOVE it. Not that I use all of it components, mostly I build my own stuff on it for testing.

    But it just looks cool. Honestly. And you have everything there for a short test what is going on in your program.

    Since you mentioned "a few", would you be willing to part with one of them? You know just in case I make a bad mistake with mine?

    Mike
  • Pictures of the PPDB + Propscope enclosure:
    IMG_20181222_203234.jpg
    IMG_20181222_203151.jpg

    I'm not sure I would sell any of my PPDB's. I have multiple different things in progress at any given time, so I use a different one for each.
    4032 x 3024 - 4M
    4032 x 3024 - 5M
  • potatoheadpotatohead Posts: 9,985
    edited 2018-12-26 - 23:39:20
    Those are nice Roy. If I were you, I would not sell. They are just great boards.

    Maybe we can get a respin on them, or just another run as they were last made.

    Just put my P2 enclosure together. Had to escape the little ones for a while, lol. Gonna fire it up before I get found.

    Great job on this kit. It is Ace! Went together easily. Love it. Thank you.

    Edit: I got the "could add fan" edition and I am glad I did. In the pictures, it looked too thick. But, when assembled and in hand, on desk, it is just fine. Thinner would have been less desirable to me. Nice when that happens.

    I happen to have some fans that will fit right in, should doing that make sense.
  • I was a bit late on ordering this enclosure, thanks for shipping between the holidays!

    It went together awesome.

    Maybe I can get the Parallax crew to sign it for me whenever we have the P2 Expo :smile:
  • I have received the enclosure - it truly is a work of art and functionality. Good job and thank you!

    Mike

  • @W9GFO

    Are the newest enclosures for the second eval board available?
  • Oh wow! I had no idea these existed. Thanks Pilot0315 for bumping this up. I want one too. Overclockers version.
  • Yes, they will be available soon. I have been dragging my feet on this because I have been working on another project. The design is ready, I just need to spend some time with the laser cutter and getting things together to put up on etsy.

    I will probably start a new thread for the new enclosures.
  • (-waves debit card!-)
  • @W9GFO

    Can you put my name on the list and PM me for payment info for an enclosure if you have any more for Rev. B Eval Board?

    Thanks!
    Doc
  • Based on the availability of 87 more boards, Rich should ramp up some more enclosures. I will be needing another one.
  • Yes, umm about that...

    My shop is in complete disarray while it is being remodeled. Of course it has turned into a bigger job than first anticipated due to the multitude of things that I have uncovered that need correcting. The laser is in the corner, drained and piled high with boxes and other stuff that would otherwise be in the way.

    I will be happy to make more once the laser is back in service, but that may be a few weeks.
  • W9GFO wrote: »
    I will be happy to make more once the laser is back in service, but that may be a few weeks.
    No problem.
  • W9GFO wrote: »
    Yes, umm about that...

    My shop is in complete disarray while it is being remodeled. Of course it has turned into a bigger job than first anticipated due to the multitude of things that I have uncovered that need correcting. The laser is in the corner, drained and piled high with boxes and other stuff that would otherwise be in the way.

    I will be happy to make more once the laser is back in service, but that may be a few weeks.

    Of course Rich. We will be happy to wait.
  • pilot0315pilot0315 Posts: 536
    edited 2020-01-18 - 20:29:42
    @W9GFO

    Please put me on the list for the next batch. If possible fan type mix up the colors please.

    Thanks

    No rush.
  • @W9GFO
    Do you have any plans to make any more cases available?

    Greg

  • groebke1 wrote: »
    @W9GFO
    Do you have any plans to make any more cases available?

    Greg

    See above.
    W9GFO wrote: »
    Yes, umm about that...

    My shop is in complete disarray while it is being remodeled. Of course it has turned into a bigger job than first anticipated due to the multitude of things that I have uncovered that need correcting. The laser is in the corner, drained and piled high with boxes and other stuff that would otherwise be in the way.

    I will be happy to make more once the laser is back in service, but that may be a few weeks.
Sign In or Register to comment.