Have you played with the LaserPIng)))? It is fantastic.
Nice! When Parallax does something, they do it right!
Perfection is achieved not when there is nothing more to add, but when there is nothing left to take away. -Antoine de Saint-Exupery
Maybe all you really needed was a wire-brush battery post and terminal cleaner.
Publison wrote: »
I like the way they look on the Stingray.
Whit wrote: »
@Publison - LaserPINGs))) do look great on the Stingray. On the attached code - Connect the left-front Ping to Pin three, the center-front Ping to Pin two, the right-front Ping to Pin one. (At one time I had Pings on Pin 0 and Pin 4 - to explain the current placement) Parallax Serial LCD 4 X 20 is connected to pin 16 on Prop Robot Control Board.
Let me know if this helps!
PRI Pings | i, Ticks
'' Runs in a seperate cog
'continuously read in Ping distances
repeat i from 1 to 3
Ticks := Ping.Ticks(PING_PIN + i)
Distance[i] := Ticks
Ticks /= 104
Ticks <#= 96