Shop OBEX P1 Docs P2 Docs Learn Events
Annual Holiday Giveaway - Page 2 — Parallax Forums

Annual Holiday Giveaway

24

Comments

  • Two 4-meter reels of 60 LED/meter RGB. WS281x. Work fine with JonnyMac's driver. One slightly used, one still sealed.

    One to a customer. Free shipping inside USA.

    Would like 28087 OLED.

    Tom,

    Like to grab one unsealed reel of led's. Will PM address.


  • Two 4-meter reels of 60 LED/meter RGB. WS281x. Work fine with JonnyMac's driver. One slightly used, one still sealed.

    One to a customer. Free shipping inside USA.

    Would like 28087 OLED.
    I didn't realize I was supposed to post here in addition to sending a PM. I've already sent a PM with my address requesting one of the LED strips. Thanks for offering them!!

  • David Betz wrote: »
    Two 4-meter reels of 60 LED/meter RGB. WS281x. Work fine with JonnyMac's driver. One slightly used, one still sealed.

    One to a customer. Free shipping inside USA.

    Would like 28087 OLED.
    I didn't realize I was supposed to post here in addition to sending a PM. I've already sent a PM with my address requesting one of the LED strips. Thanks for offering them!!

    I really does not matter, but if you post here first, It let's others know that the item is gone.

  • I just added some stuff to my list of items.
  • David Betz wrote: »
    Stuff I'm willing to give away to recipients in the USA:

    #35000 Board of Education Shield
    #28036 4-Direction Tilt Sensor
    #555-28027 Passive Infrared Motion Sensor (two of these)
    #28017 Memsic Dual-Axis Accelerometer
    #28500 PMB-648 SiRF GPS Int Antenna (two of these)
    #29133 Compass Module HMC5883L
    #27800 2-Axis Joystick (two of these)
    #27911 Gyroscope Module L3G4200D
    #27899 4x4 Matrix Membrane Keypad
    #28380 ColorPAL
    #28825 SoundPAL
    #29124 Altimeter Module MS5607
    #27801 5-Position Switch

    MQ-5 Gas Sensor
    SimplyTronics ST EDU ST-00101 Rev A
    Cluso's BaseBlade1 + MemBlade
    Bill Henning's RoboPi minus the DIP Propeller chip
    Raspberry Icing minus the DIP Propeller chip
    DEF CON 22 Badge

    Stuff I'm interested in:

    A QuadRover! :-)

    I always wanted a Defcon badge to see if it would talk to the Parallax Badge. Can I grab that?


  • Publison wrote: »
    David Betz wrote: »
    Stuff I'm willing to give away to recipients in the USA:

    #35000 Board of Education Shield
    #28036 4-Direction Tilt Sensor
    #555-28027 Passive Infrared Motion Sensor (two of these)
    #28017 Memsic Dual-Axis Accelerometer
    #28500 PMB-648 SiRF GPS Int Antenna (two of these)
    #29133 Compass Module HMC5883L
    #27800 2-Axis Joystick (two of these)
    #27911 Gyroscope Module L3G4200D
    #27899 4x4 Matrix Membrane Keypad
    #28380 ColorPAL
    #28825 SoundPAL
    #29124 Altimeter Module MS5607
    #27801 5-Position Switch

    MQ-5 Gas Sensor
    SimplyTronics ST EDU ST-00101 Rev A
    Cluso's BaseBlade1 + MemBlade
    Bill Henning's RoboPi minus the DIP Propeller chip
    Raspberry Icing minus the DIP Propeller chip
    DEF CON 22 Badge

    Stuff I'm interested in:

    A QuadRover! :-)

    I always wanted a Defcon badge to see if it would talk to the Parallax Badge. Can I grab that?

    I don't see why not. Send me your address in a PM.

  • Publison wrote: »
    I always wanted a Defcon badge to see if it would talk to the Parallax Badge.
    That reminds me that I've always wanted a Parallax Badge. :-)

  • David Betz wrote: »
    Publison wrote: »
    I always wanted a Defcon badge to see if it would talk to the Parallax Badge.
    That reminds me that I've always wanted a Parallax Badge. :-)
    I'll send you one.


  • Publison wrote: »
    David Betz wrote: »
    Publison wrote: »
    I always wanted a Defcon badge to see if it would talk to the Parallax Badge.
    That reminds me that I've always wanted a Parallax Badge. :-)
    I'll send you one.

    Really? I was just kidding. They're kind of expensive.

  • David BetzDavid Betz Posts: 14,511
    edited 2016-11-30 21:16
    Is it safe to pack a populated PCB in a padded envelope or should I find a small box?
  • David Betz wrote: »
    Is it safe to pack a PCB in a padded envelope or should I find a small box?
    Padded should work fine. They are light.

  • Tom, I'd like the other reel of WS2812 LEDs. Will PM my address.
  • #35000 Board of Education Shield
    DEF CON 22 Badge

    FYI, I mailed the above two items today. You should have them by Saturday. Enjoy!
  • Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
  • Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
    Umm... I sent you the BOE Shield and Publison the badge. Did I get that wrong?

  • Anyone know what happened with the LED strips that Tom offered? I counted three requests but there were only two strips.
  • David Betz wrote: »
    Anyone know what happened with the LED strips that Tom offered? I counted three requests but there were only two strips.

    I'm mailing these to you and Publison today. You two scarfed first.

  • David Betz wrote: »
    Anyone know what happened with the LED strips that Tom offered? I counted three requests but there were only two strips.

    I'm mailing these to you and Publison today. You two scarfed first.
    Cool! Thanks! Sorry I don't have an OLED to send to you.

  • ercoerco Posts: 20,244
    Wait, is this only for the young and pure at heart?
  • erco wrote: »
    Wait, is this only for the young and pure at heart?
    Certainly not! At least, I guess not since I am a recipient.
  • David Betz wrote: »
    Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
    Umm... I sent you the BOE Shield and Publison the badge. Did I get that wrong?

    Of course not. There was a joke in there, someplace.

    Actually erco this is for all of us. But why are your robots starting to walk to NYC? They plan on walking the entire 3000 miles (or so) between where you are, and here.........

  • David Betz wrote: »
    Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
    Umm... I sent you the BOE Shield and Publison the badge. Did I get that wrong?

    Of course not. There was a joke in there, someplace.
    Sorry for being dense. I'm beginning to be worried that not many people actually read these forums. Quite a few things were offered for free by various people and there don't seem to be many takers. Maybe it isn't interesting enough stuff?
  • David Betz wrote: »
    David Betz wrote: »
    Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
    Umm... I sent you the BOE Shield and Publison the badge. Did I get that wrong?

    Of course not. There was a joke in there, someplace.
    Sorry for being dense. I'm beginning to be worried that not many people actually read these forums. Quite a few things were offered for free by various people and there don't seem to be many takers. Maybe it isn't interesting enough stuff?

    Yea, People come and go. I was hoping to get some new people involved with free stuff.
  • Well all of Walter's items arrived today.

    Now I just need to drum up support.

    Aside from one of them, it was all clearly identifiable.
  • David Betz wrote: »
    David Betz wrote: »
    Okay.

    I'll be sure to send the badge to Publison after what he's sending me arrives.
    :nerd: :chip:
    Umm... I sent you the BOE Shield and Publison the badge. Did I get that wrong?

    Of course not. There was a joke in there, someplace.
    Sorry for being dense. I'm beginning to be worried that not many people actually read these forums. Quite a few things were offered for free by various people and there don't seem to be many takers. Maybe it isn't interesting enough stuff?

    Hah! I'd take everything on your list! Actually, there are a few items I want, but not badly enough to take them if someone else has a greater need. So, I'll bide my time and get back to you shortly if you still have some of that stuff available.

    In the meantime, I need to look through my drawers for things to offer. I don't have much in the way of Parallax hardware, but there are still a few other things things that y'all might like...
  • ercoerco Posts: 20,244
    Who needs plywood and relays?
  • SeairthSeairth Posts: 2,474
    edited 2016-12-13 18:19
    Okay. Here are a few items in my bin that are up for grabs (US shipping only):

    Non-Parallax items:

    5 2 Adafruit Pro Trinket (they are actually the 5V Hackaday version)
    5 2 Cypress CY8CKIT-059 PSoC 5LP
    2 1 BlinkyPendants (by BlinkinLabs)

    Parallax items:

    2 conference badges (Guest)
    1 1-2-3 A7 Board (w/out PLL fix)
  • Seairth wrote: »
    Okay. Here are a few items in my bin that are up for grabs:

    Non-Parallax items:

    5 Adafruit Pro Trinket (they are actually the 5V Hackaday version)
    5 3 Cypress CY8CKIT-059 PSoC 5LP
    2 BlinkyPendants (by BlinkinLabs)

    Parallax items:

    2 conference badges (Guest)
    1 1-2-3 A7 Board (w/out PLL fix)

    Hello!
    And there's a PM waiting for you regarding the badge. You can include the Cypress gadget if you want, if no one else asks about it.

  • David BetzDavid Betz Posts: 14,511
    edited 2016-12-02 10:53
    Seairth wrote: »
    Okay. Here are a few items in my bin that are up for grabs:

    Non-Parallax items:

    5 Adafruit Pro Trinket (they are actually the 5V Hackaday version)
    5 3 Cypress CY8CKIT-059 PSoC 5LP
    2 BlinkyPendants (by BlinkinLabs)

    Parallax items:

    2 conference badges (Guest)
    1 1-2-3 A7 Board (w/out PLL fix)
    I'm interested in one of the BlinkyPendants if they haven't both already been claimed. I'll PM a mailing address.

    Also, if no one else asks for anything soon, I'd be happy to send you all of my remaining items. It means I only have to pack up one box! :-)

  • David Betz wrote: »
    Stuff I'm willing to give away to recipients in the USA:

    .....
    SimplyTronics ST EDU ST-00101 Rev A
    ....
    Bill Henning's RoboPi minus the DIP Propeller chip (Propeller board that plugs into a RaspberryPi)
    Raspberry Icing minus the DIP Propeller chip (Propeller board that plugs into a RaspberryPi)
    ....

    PM Sent: I am interested in the following items:
    - SimplyTronics ST EDU ST-00101 Rev A
    - Bill Henning's RoboPi minus the DIP Propeller chip (Propeller board that plugs into a Raspberry Pi)
    - Raspberry Icing minus the DIP Propeller chip (Propeller board that plugs into a Raspberry Pi)

    Regards,

    zappman
Sign In or Register to comment.