Shop OBEX P1 Docs P2 Docs Learn Events
Interfacing a SmartCard to a Stamp2 — Parallax Forums

Interfacing a SmartCard to a Stamp2

ArchiverArchiver Posts: 46,084
edited 2000-03-20 06:02 in General Discussion
Has anyone SUCCESSFULLY interfaced a SmartCard memory module to a Stamp2? I
would like to attach a 8MB module for some serious data logging. Any info
would be appreciated.

TIA

Vic
_________________________________________

Victor Fraenckel vfraenc1@n...
Home of the WindReader Electronic Theodolite
Read the WIND

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2000-03-18 17:22
    Dear Victorf ,

    I did not start working on this, but I am also interested. I searched the
    net and find some info , you will find an enclosed file with this message
    which might be helpful for you.


    Asad Raza Kazmi


    Original Message
    From: Victorf <vfraenc1@n...>
    To: Stamp Mailing List <basicstamps@egroups.com>
    Sent: Saturday, March 18, 2000 10:55 AM
    Subject: [noparse][[/noparse]basicstamps] Interfacing a SmartCard to a Stamp2


    > Has anyone SUCCESSFULLY interfaced a SmartCard memory module to a Stamp2?
    I
    > would like to attach a 8MB module for some serious data logging. Any info
    > would be appreciated.
    >
    > TIA
    >
    > Vic
    > _________________________________________
    >
    > Victor Fraenckel vfraenc1@n...
    > Home of the WindReader Electronic Theodolite
    > Read the WIND
    >
    >
    >
    >
    >
    > -- Easily schedule meetings and events using the group calendar!
    > -- http://www.egroups.com/cal?listname=basicstamps&m=1
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2000-03-18 20:37
    I am also interested in this. Where can you get a smartcard with a lot of
    memory and how much does it cost? Also, Where can you get an inexpensive
    card reader?
    Thanks
    Heath Lovell


    At 10:22 PM 3/18/00 +0500, you wrote:
    >Dear Victorf ,
    >
    >I did not start working on this, but I am also interested. I searched the
    >net and find some info , you will find an enclosed file with this message
    >which might be helpful for you.
    >
    >
    >Asad Raza Kazmi
    >
    >
    >
    Original Message
    >From: Victorf <vfraenc1@n...>
    >To: Stamp Mailing List <basicstamps@egroups.com>
    >Sent: Saturday, March 18, 2000 10:55 AM
    >Subject: [noparse][[/noparse]basicstamps] Interfacing a SmartCard to a Stamp2
    >
    >
    >> Has anyone SUCCESSFULLY interfaced a SmartCard memory module to a Stamp2?
    >I
    >> would like to attach a 8MB module for some serious data logging. Any info
    >> would be appreciated.
    >>
    >> TIA
    >>
    >> Vic
    >> _________________________________________
    >>
    >> Victor Fraenckel vfraenc1@n...
    >> Home of the WindReader Electronic Theodolite
    >> Read the WIND
    >>
    >>
    >>
    >>
    >>
    >> -- Easily schedule meetings and events using the group calendar!
    >> -- http://www.egroups.com/cal?listname=basicstamps&m=1
    >>
    >>
    >
    >
    >
    >
    >eGroups.com home: http://www.egroups.com/group/basicstamps
    >http://www.egroups.com - Simplifying group communications
    >
    >
    >
    >
    >Attachment Converted: "c:\user\heath\ukmail\attach\Reading Smart card with
    Stam-II.doc"
    >
  • ArchiverArchiver Posts: 46,084
    edited 2000-03-19 04:18
    Mike Hardwick made this great post to stamps@p... on Tuesday,
    February 22, 2000 12:31 PM

    Re: [noparse][[/noparse]STAMPS] Interfaceing sx2 with an ide HD, try compact flash instead

    On a similar note... I was researching flash data storage concepts for a
    new project, and happened to run across some information on Samsung's site
    that may be useful. They offer 'SmartMedia' cards up to 64MB. The
    electrical interface is very simple, and the cards are sold widely for use
    in digital cameras. Look here for complete specs:

    http://www.usa.samsungsemi.com/products/browse/ssfdc.htm

    Mike Hardwick, for Decade Engineering -- <http://www.decadenet.com>
    Manufacturer of the famous BOB-II Serial Video Text Display Module!


    Original Message
    From: Heath A. Lovell <halove00@p...>
    To: <basicstamps@egroups.com>
    Sent: Saturday, March 18, 2000 3:37 PM
    Subject: [noparse][[/noparse]basicstamps] Re: Interfacing a SmartCard to a Stamp2


    > I am also interested in this. Where can you get a smartcard with a lot of
    > memory and how much does it cost? Also, Where can you get an inexpensive
    > card reader?
    > Thanks
    > Heath Lovell
    >
    >
    > At 10:22 PM 3/18/00 +0500, you wrote:
    > >Dear Victorf ,
    > >
    > >I did not start working on this, but I am also interested. I searched the
    > >net and find some info , you will find an enclosed file with this message
    > >which might be helpful for you.
    > >
    > >
    > >Asad Raza Kazmi
    > >
    > >
    > >
    Original Message
    > >From: Victorf <vfraenc1@n...>
    > >To: Stamp Mailing List <basicstamps@egroups.com>
    > >Sent: Saturday, March 18, 2000 10:55 AM
    > >Subject: [noparse][[/noparse]basicstamps] Interfacing a SmartCard to a Stamp2
    > >
    > >
    > >> Has anyone SUCCESSFULLY interfaced a SmartCard memory module to a
    Stamp2?
    > >I
    > >> would like to attach a 8MB module for some serious data logging. Any
    info
    > >> would be appreciated.
    > >>
    > >> TIA
    > >>
    > >> Vic
    > >> _________________________________________
    > >>
    > >> Victor Fraenckel vfraenc1@n...
    > >> Home of the WindReader Electronic Theodolite
    > >> Read the WIND
    > >>
    > >>
    > >>
    > >>
    >
    >>
    > >> -- Easily schedule meetings and events using the group calendar!
    > >> -- http://www.egroups.com/cal?listname=basicstamps&m=1
    > >>
    > >>
    > >
    > >
    > >
    > >
    > >eGroups.com home: http://www.egroups.com/group/basicstamps
    > >http://www.egroups.com - Simplifying group communications
    > >
    > >
    > >
    > >
    > >Attachment Converted: "c:\user\heath\ukmail\attach\Reading Smart card
    with
    > Stam-II.doc"
    > >
    >
    >
    >
    >
    > -- Easily schedule meetings and events using the group calendar!
    > -- http://www.egroups.com/cal?listname=basicstamps&m=1
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2000-03-20 06:02
    There are Toshiba's SmartMedias sold in Digikey. But I can not find any
    socket for Smart Media. Does anyone know where to find the socket for Smart
    media?

    Simon
    Original Message
    From: Heath A. Lovell <halove00@p...>
    To: <basicstamps@egroups.com>
    Sent: Sunday, March 19, 2000 4:37 AM
    Subject: [noparse][[/noparse]basicstamps] Re: Interfacing a SmartCard to a Stamp2


    > I am also interested in this. Where can you get a smartcard with a lot of
    > memory and how much does it cost? Also, Where can you get an inexpensive
    > card reader?
    > Thanks
    > Heath Lovell
    >
    >
    > At 10:22 PM 3/18/00 +0500, you wrote:
    > >Dear Victorf ,
    > >
    > >I did not start working on this, but I am also interested. I searched the
    > >net and find some info , you will find an enclosed file with this message
    > >which might be helpful for you.
    > >
    > >
    > >Asad Raza Kazmi
    > >
    > >
    > >
    Original Message
    > >From: Victorf <vfraenc1@n...>
    > >To: Stamp Mailing List <basicstamps@egroups.com>
    > >Sent: Saturday, March 18, 2000 10:55 AM
    > >Subject: [noparse][[/noparse]basicstamps] Interfacing a SmartCard to a Stamp2
    > >
    > >
    > >> Has anyone SUCCESSFULLY interfaced a SmartCard memory module to a
    Stamp2?
    > >I
    > >> would like to attach a 8MB module for some serious data logging. Any
    info
    > >> would be appreciated.
    > >>
    > >> TIA
    > >>
    > >> Vic
    > >> _________________________________________
    > >>
    > >> Victor Fraenckel vfraenc1@n...
    > >> Home of the WindReader Electronic Theodolite
    > >> Read the WIND
    > >>
    > >>
    > >>
    > >>
    >
    >>
    > >> -- Easily schedule meetings and events using the group calendar!
    > >> -- http://www.egroups.com/cal?listname=basicstamps&m=1
    > >>
    > >>
    > >
    > >
    > >
    > >
    > >eGroups.com home: http://www.egroups.com/group/basicstamps
    > >http://www.egroups.com - Simplifying group communications
    > >
    > >
    > >
    > >
    > >Attachment Converted: "c:\user\heath\ukmail\attach\Reading Smart card
    with
    > Stam-II.doc"
    > >
    >
    >
    >
    >
    > -- Easily schedule meetings and events using the group calendar!
    > -- http://www.egroups.com/cal?listname=basicstamps&m=1
    >
    >
Sign In or Register to comment.