PDA

View Full Version : conecting basic stamp to the SLED-C4



crim
04-26-2007, 12:08 AM
how do i send data from basic stamp to the SLED-C4 seven segmint serial display·?
please help

Newzed
04-26-2007, 12:19 AM
Crim, I am attaching the program I use to write from my BS2 to the SLED4 module.· Maybe it will help.· You will need a DS1302 for the time.

Sid

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Yesterday is history, tomorrow is a mystery, and today is a gift.

That is why they call it the present.

Don't have VGA?
Newzed@aol.com (mailto:Module?Newzed@aol.com)

crim
04-26-2007, 12:23 AM
thank you. it lends me some usefull info.

crim
04-26-2007, 12:33 AM
·im use ing a one wire device and when i try to use the OWOUT comand it dos'nt turn blue and then i get an error

Chris Savage
04-26-2007, 10:28 PM
crim,

Do you have the SLED-4C or the SLED-C4? These are 2 different devices and use different code and connections. The code Sid posted was for the older SPI display. The one they’re selling now is Asynchronous Serial. Can you confirm which one you have?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support

Tracy Allen
04-27-2007, 12:04 AM
crim,

Did you read the responses to your posting from yesterday?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Tracy Allen
www.emesystems.com (http://www.emesystems.com)

Chris Savage
04-27-2007, 01:17 AM
Tracy,

After seeing your post I looked at his previous posts and didn’t realize this was a duplicate thread.

crim,

Please post messages on a subject in one thread only. It is confusing to try and help when the messages are scattered among non-related threads.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support