PDA

View Full Version : LCD problem



Imran
04-12-2007, 02:17 PM
Guys, I am having trouble in transferring the Photoresistor readings to the parallel LCD 2x16. PLease could someone give the source code for this.

Imran
04-12-2007, 06:06 PM
is there nobody to answer this

Shawn Lowe
04-12-2007, 07:15 PM
Posting your code will definately help!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Shawn Lowe


My last words shall be - "NOT YET!!!"

Imran
04-12-2007, 07:31 PM
Actually I dont understand, how to transfer the photoresistor readings to the Parallel LCD. First write the readings to the eeprom and then transfer to the LCD, or direct to the LCD. Please if someone could write an example source code, it would be very helpful.

Mike Green
04-12-2007, 08:51 PM
1) You're giving very little information about your setup. What photoresistor readings are you talking about?

2) There are all kinds of examples of programs that send data to a parallel LCD (start with: www.parallax.com/detail.asp?product_id=603-00006 (http://www.parallax.com/detail.asp?product_id=603-00006)). Parallax products always include lots of examples. They're usually on the product page. Some are in the Stamps in Class tutorials and some are in Nuts and Volts articles. These can be downloaded by selecting the Download menu item on the main Parallax page and choosing "Stamps in Class Tutorials" or "Nuts and Volts Columns".

Post Edited (Mike Green) : 4/12/2007 1:55:50 PM GMT

dandreae
04-13-2007, 03:21 AM
You will also find examples in the "StampWorks" text.· Here is a link for the download:· http://www.parallax.com/detail.asp?product_id=27220


Dave

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Dave Andreae

Parallax Tech Support·