PDA

View Full Version : Interface LED matrix kit



shagy2003
03-26-2007, 04:02 PM
My problem is as under.
I want to Interface LED matrix kit(SLS product) on expansion headers of UP3(ESDK) kit.The kit should be connected with the PC via RS232 on seiral port.
The input to the board should be given via Hyper terminal from PC.So whatever characters Input from the keyboard should be displayed on the LED matrix.
1)Please tell me exact procedure to do the task.
2)I m not gettin function of the level translator IC(U21) which is max 3243c so please tell me exact function and output data format of the same.
3)ESDK supports UART or not?If yes then wat should be the procedure?Can u plese send some literature on ESDK UART?
4)Can u please give me some sample verilog code of LED matrix-ESDK interface?or give some logic,look up table for the same.Please do this urjently and kindly because date of submission of my final year BE project is 5th April.
For ur reference I'm attaching the schematic diagram of the LED matrix.
Thanking you in advance,
Regards,
Bhavin

[Subject Edited By Moderator]

Post Edited By Moderator (Chris Savage (Parallax)) : 3/26/2007 3:14:02 PM GMT

shagy2003
03-26-2007, 04:03 PM
please tell me how to glow single LED in 21X8 LED dot matrix

Loopy Byteloose
03-26-2007, 05:44 PM
ˇI suggest you use the SANDBOX if you expect to get any reply.ˇ If you read your attached document [as I have], I suspect you can answer the question for yourself.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"If you want more fiber, eat the package.ˇ Not enough?ˇ Eat the manual."ˇˇˇˇˇˇˇˇ


ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ Tropical regards,ˇˇˇˇˇ G. Herzog [ˇ黃鶴 ]ˇin Taiwan


Post Edited (Kramer) : 3/26/2007 10:56:03 AM GMT

Bean
03-26-2007, 06:11 PM
Not to mention that you have cross-posted in THREE forums...
Bean

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"Educate your children to self-control, to the habit of holding passion and prejudice and evil tendencies subject to an upright and reasoning will, and you have done much to abolish misery from their future and crimes from society (http://www.quotationspage.com/quote/29139.html)"

Benjamin Franklin
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
www.hittconsulting.com (http://www.hittconsulting.com)
ˇ

Chris Savage
03-26-2007, 10:11 PM
This thread is being moved from the Competed Projects Forum to the Sandbox Forum.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support

T&E Engineer
03-26-2007, 11:25 PM
It looks like it is designed to work with Altera boards - but it may be modifiable to work with BS2 / SX chips. Here is an attachedˇbrochure and other details:

http://www.slscorp.com/pages/ledsls.php

I think for the level questions you ask, you should probably post your questions to SLS as many people here are only versed on Parallax products.

Post Edited (T&E Engineer) : 3/26/2007 4:34:30 PM GMT