PDA

View Full Version : eb 500 confusion



Carbs
02-02-2007, 05:43 AM
How can i send pbasic commands from one BOE to another using the eb 500?

Franklin
02-02-2007, 10:49 AM
This is explained starting on page 23 of the manual.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen

Carbs
02-03-2007, 03:32 AM
Okay, i have already accomplished page 23 of the manual.· I have established connections between my two eb 500's using the appropriate mac addresses.· I would like to isolate one of the boards with say an LED on it, and then from·the other·eb500 (that's connected to the computer), I would like to send commands to that board via the bluetooth connection.· Ex. A HIGH command to turn on an Led on the isolated board.· How do i send the commands from one eb 500 to aonother?

Franklin
02-04-2007, 02:50 AM
You won't be able to send pbasic commands but you can send and receive ascii that the receiving stamp will interperet as commands.
send "led2 on"
receive string if string = 'led2 on" high led2

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen

Carbs
02-04-2007, 09:09 AM
ohhh i see, so use the ascii as variables. Then on the receiving board, the ascii are recognized and matched up to the appropriate commands using variables on the recieving board. Thank youu