PDA

View Full Version : Source for black 'Header' connector on Parallax stamp boards.



carline
12-04-2006, 09:38 AM
Anyone know of a source for the black header type connector located next to the
experimenters area on the Parallax boards.. I need 24 and 32 pin versions.·

Thanks
carline

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chuck Arline

·

Roger Pierson
12-04-2006, 10:44 AM
www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=513842 (http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=513842)

That is one such connector, you'll have to look at the specs on the board to get the pin spacing on the header to select the right connector, but that company has most of the popular sizes.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Roger Pierson
Senior Electronics Technicain
DTI Assoicates

Kenny Gardner
12-05-2006, 03:29 AM
As was mentioned, Jameco has them but not in the size you need. You'll have to mix and match:

www.jameco.com/Jameco/catalogs/c264/P149.pdf (http://www.jameco.com/Jameco/catalogs/c264/P149.pdf)

2 12 pins: 200782CG
2 16 pins: 70720CG

www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=200782CG&productId=200782 (http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=200782CG&productId=200782)
www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=70720CG&productId=70720 (http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=70720CG&productId=70720)

Or, if you need the exact size, Samtec probably has them (they have just about any connector and probably where Parallax buys theirs).

www.samtec.com/ (http://www.samtec.com/)

Kenny

Paul Bouchard (Parallax)
12-06-2006, 06:15 AM
Carline, we·can possibly get you the headers you are looking for if you can add some specifics to which boards you are referring to. Which "Parallax Boards" are you talking about