PDA

View Full Version : Propeller IDE Problem



PMinMO
10-17-2006, 10:43 PM
My propeller IDE on my desktop coninually comes up with an error when I bring it up that a disk is missing. The computer has been off an on (rebooted) numerious times and it still continues. I've redownloaded, reinstalled, no change. It doesn't do it on my laptop. Suggestions?

Phil

Chris Savage
10-18-2006, 12:27 AM
Phil,

Do you happen to have a Camera Card Reader connected to your computer?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support

Phil Pilgrim (PhiPi)
10-18-2006, 12:34 AM
Chris,

I'm having that same problem again myself. And it is from a memory card reader. It resurfaced after I inserted, then removed, a camera card from the reader.

-Phil

Chris Savage
10-18-2006, 12:47 AM
Phil,

I know this was an issue with the BASIC Stamp Editor. It seems when the ‘Explorer’ sees a drive and tries to read it and that drive has no mounted volume perhaps this is what generates the error. Jeff could answer this better, but usually having the card inserted or disconnecting the drive will curb the problem. Simply canceling past it is a work around.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support

PMinMO
10-18-2006, 03:33 AM
yes there is a 4 port card reader as an integral part of the machine. I do have a usb flas drive plugged in?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Phil

Too many interests, too many projects, not enough time!!!
Visit my website http://PMinMO.com