PDA

View Full Version : StampPlot Lite and StampDAQ



cesam
05-18-2006, 02:08 PM
I want to know what are the limit in time delay between each data point for this two data logger software. Beucase i want to my stamp to keep track of my experience result.

Thanks


Martin Hebel
05-20-2006, 10:37 AM
Probably longer than you need.... days? Especially StampDAQ since it simply dumps data in a spreadsheet without worrying about plotting. I'd be more concerned how long you can keep a PC running continually :)

-Martin

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Martin Hebel
Southern Illinois University Carbondale - Electronic Systems Technologies (http://www.siu.edu/~isat/est)

Personal Links with plenty of BASIC Stamp info (http://www.isat.siu.edu/hebel/links_personal.htm)
StampPlot - Graphical Data Acquisition and Control (http://www.stampPlot.com)

Chris Savage
05-20-2006, 12:22 PM
This thread is being moved from the Projects Forum to the BASIC Stamp Forum.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com (mailto:csavage@parallax.com)

cesam
05-21-2006, 01:09 AM
Is that possible to take data with time intervial less then 10ms?
As i know accoring to the help from stamp plot lite, it recommend 10ms delay. But i did not start testing the shortest time intervial.

I have an idea using stamp plot lite or sampDAQ to build a simple data logger by using fastest MCU. Becasue basic stamp is good for testing or prototyping, once the conecpt is work, i perfer to rebuit the enter system by using other cheap and faster MCU.