PDA

View Full Version : Power supply question.



Special_K
04-29-2006, 09:30 AM
I have a power question. I have two old power supplies from zip drives long dead.
They have an output of 5VDC 1000mA
I use these power supplies to power my Parallax Servo Controller or Board Of Education with BS2... Will I burn them out.

Chris Savage
04-29-2006, 12:42 PM
If you measure the voltage from the connector at 5V and you have the proper polarity you should be okay.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com (mailto:csavage@parallax.com)