PDA

View Full Version : RFID help



shmagoogin
01-29-2006, 07:47 AM
Hello
I just recieved my RFID reader and am amazed with it
Except for one thing
the thing comes with example code but i have no idea what the heck its talking about
i havnt had my basic stamp for too long but im pretty good sith it
so if someone could walk me through the example code given here http://www.parallax.com/dl/src/prod/RFID1.BS2 it would be soo helpful
thanks
ed

Chris Savage
01-29-2006, 08:48 AM
Ed,

It might be easier to explain what you don't undertand. There are two main example codes for the RFID Reader. One displays the code from a tag while the other simulates a security door tag reader.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com (mailto:csavage@parallax.com)

Jon Williams
01-29-2006, 08:49 AM
This article may help fill in any gaps: http://www.parallax.com/dl/docs/cols/nv/vol6/col/nv120.pdf

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax

shmagoogin
01-29-2006, 10:28 PM
how could you make the securioty door tag reader
not the codeing for it like the actuall locking part

Jon Williams
01-30-2006, 12:10 AM
You might want to do a web search on security systems and look for electric door latches. Essentially, you want a solenoid controlled latch.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax