PDA

View Full Version : eb500 to basic stamp2



StarteR2
01-28-2006, 08:44 PM
Is there any way to make the basic stamp work with the eb500 and make it comunicate directly? sending programs to robot wireless?

Jonathan
01-28-2006, 10:52 PM
Start,

The EB500 should work with the Stamp, but it will not program it. I have been meaning to get around to working on a system that would let it program the stamp, but I haven't yet. My plan was to put a small co-proccesor that sniffs the incoming data for a "program" command. When it see it, it pulls the program pin on the Stamp low or high, whichever it needs, then releases it once it gets the "program done" command.

Jonathan

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
www.madlabs.info (http://www.madlabs.info) - Home of the Hydrogen Fuel Cell Robot

Chris Savage
01-29-2006, 01:19 AM
In the meantime we have a BlueTooth solution available for programming and communication.

http://www.parallax.com/detail.asp?product_id=30076

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com (mailto:csavage@parallax.com)