PDA

View Full Version : BS2p40 and USB stamp eval board



kevinj
08-20-2005, 09:16 AM
Can I take the Basic stamp 2 off the USB basic stamp 2 eval board and·plug·the BS2p40·into its spot? I know pins will be hanging off, but they will be I/O pins.·Also, will the Hitachi compass code still work with the the BS2p40? Kevin.

Chris Savage
08-20-2005, 09:34 AM
Kevin,

·· I guess you could do that.· Not sure why you would want to, but as long as the pins aren't touching anything it wouldn't hurt anything.· Note that the I/O pins from 8-15 on the Main I/O and 0 - 7 on the AUX I/O will be unavailable.· This means that AUX P8-P15 will appear where the main P8-P15 would.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com (mailto:csavage@parallax.com)