View Full Version : LCD problem
davids
05-30-2005, 07:11 PM
Have I have·two·LCD's a LM016L 2X16 LCD and Milford 2X16 LCD.·Is it·possable either one of these·LCD's·will work with the LCDCMD demo.· I tried the wiring diagram in the Syntax and Ref Manual, but it didn't display anything.· Techo help would be great
Newzed
05-30-2005, 07:48 PM
The LCDCMD command requires specific wiring for the LCD:
LCD 1 to Vss
LCD 2 to Vdd
LCD 3 to Vss
LCD Pin 4 to P3
LCD Pin 5 to P2
LCD Pin 6 to P0
LCD Pin 11 to P4
LCD Pin 12 to P5
LCD Pin 13 to P6
LCD Pin 14 to P7
See if this works.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Sid Weaver
Need a bezel for your LCD?
Newzed@aol.com (mailto:Newzed@aol.com)
·
Newzed
05-30-2005, 07:55 PM
Also, LCDCMD works only with a BS2p or a BS2pe.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Sid Weaver
Need a bezel for your LCD?
Newzed@aol.com (mailto:Newzed@aol.com)
·
Jon Williams
05-30-2005, 08:30 PM
... and BS2px!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
Newzed
05-30-2005, 09:37 PM
Thanks, Jon.· I keep forgetting about the pxhttp://forums.parallax.com/images/smilies/confused.gif
Sid
davids
09-10-2005, 06:40 PM
Hi,
I have been trying for ages to get my hands on a PX, but I haven't been able to get it in to Australia. Can anone tell me when it may be available
Jon Williams
09-10-2005, 07:13 PM
Contact your local distributor (ask them to carry it) or you can order direct from us.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
davids
09-13-2005, 02:39 PM
They told me it was something to do with a high EMF level in the chip. So they pressed me to use Assembly langauge instead.
Jon Williams
09-13-2005, 06:52 PM
What? You're saying that your distributor has sent the BS2px to a lab and determined that it has high levels of EMF? We'd *love* to see those test results. Perhaps you should just order direct from us, though I understand shipping can be difficult.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
davids
09-14-2005, 01:55 PM
I do know if he has tested it, just the fact that he doesn't, and will not in the furture. As for direct shipping in australia the shipping cost is to high to even think about getting one unit myself, Sorry John
Regards
David