PDA

View Full Version : LCD2041-GW matrix orbital



prisco
05-22-2005, 07:09 PM
http://forums.parallax.com/images/smilies/eyes.gif·· please

it's possible for stamp 2·· ,use the LCD2041-GW (http://www.matrixorbital.com/product_info.php?pName=lcd2041gw&cName=lcd-character-lcds)·" matrix orbital"· tank you··
http://www.matrixorbital.com/index.php?cName=lcd-character-lcds&osCsid=a138df621bffa705f742d13c66bab66a

' message of french

prisco
05-22-2005, 07:30 PM
it 's posssible ?


serout 0 ," hello"

Jon Williams
05-22-2005, 08:06 PM
Yes, it should be possible. You'll need to configure the unit for TTL communications and connect your serial pin and ground to the display. Once that's done, try one of thse lines -- I'm giving you two lines because I don't know if the display uses inverted serial or not.

SEROUT 0, 32+$4000, ["Hello, World!"]

If that doesn't work...

SEROUT 0, 32, ["Hello, World!"]

Note that the 32 in the SEROUT command is the baud parameter for 19.2K on the BS2.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
Dallas, TX· USA

Bronson
05-23-2005, 07:50 AM
Presco,

I have used LK-204-25 and LK-202-25 (both are serial interface) from MatrixOrbital. I believe that their products are fully compatible with BasicStamp. I can access all functions of the LCD from my BS2. If LCD2041-GW is serial interface, go for it !!

Bronson Alex

prisco
05-23-2005, 04:59 PM
hello
tank you

Tom-Matrix Orbital
05-25-2005, 04:57 AM
Just to confirm our full product line can be used with the BS2.

Other samples for the stamp can be found at http://www.lcdforums.com/forums/viewtopic.php?t=937 .

Best Regards,