I the sensor detects nothing does the line go low after t_in-max or is t_in-max the length of time for maxium range?· With the )s in the name is BasicStamp Lisp in the hopper?
Jon Williams
03-08-2005, 04:10 AM
If no object is detected the line will drop at the max range point -- you can use this as a check.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
Dallas, TX· USA