PWM-PAL for Basic Stamp Stack 2 Kit

[Steven]

We have a Basic Stamp Stack 2 microcontroller and we want use a PWM-PAL with it. Is there any PWM-PAL chips that will fit into the 28pin configuration, and if so where can I get them cheap??

Steve

[Jon Williams]

The Stamp Stack is not manufactured by Parallax, so the short answer is "No." I've read of others using jumpers to connect the PWMPAL to non-BS2-format modules.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
Dallas, TX· USA