PDA

View Full Version : Flow Control for SERIN



nikosz
08-24-2004, 06:13 PM
I want assign a pin for flow control using· SERIN command.
Flow control is· useful· when a BS2 has to sent data to a· desktop PC .
I know that· PIN 16 is the PIN that serin use to get data for ·example:
SERIN 16,BAUD,[VARIABLE]
Which PIN can I ·assign ·for flow control using the onboard serial port
SERIA 16,?,BAUD,[VARIABLE]
·http://forums.parallax.com/images/smilies/freaked.gif

Post Edited By Moderator (Jon Williams) : 8/24/2004 3:13:14 PM GMT

Jon Williams
08-24-2004, 11:15 PM
You can use any of your available BASIC Stamp pins, but for proper operation with the P16 SERIN you'll need to use an inverter.· This article may help you:

http://www.parallax.com/dl/docs/cols/nv/vol3/col/nv89.pdf

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Jon Williams
Applications Engineer, Parallax
Dallas Office