PDA

View Full Version : I need help!



jdeb8465
01-22-2012, 05:13 AM
Hey everyone Im brand new to parallax and have only done some very basic programming. I just recently bought a QuickStart board at radio shack and need help learning the language does anyone have some advice.

Mike Green
01-22-2012, 05:23 AM
Start with the Propeller Education Labs tutorials and browse through the Propeller Resource Index thread, both are at the top of the thread list in the Propeller Forum. Also read through the Nuts and Volts Columns on the Propeller. You can find the index to these under the Resources tab on the main Parallax webpage. Make sure you have a copy of the Propeller Manual from the Propeller Downloads webpage. There's also a whole lot of documentation on the QuickStart board on the Parallax Semiconductor (http://www.parallaxsemiconductor.com/) web pages. Look under the Products drop-down. You'll have fun.

ElectricAye
01-22-2012, 05:30 AM
These are some of the links, as Mike suggested:

http://forums.parallax.com/showthread.php?111166-Propeller-Resource-Index

http://forums.parallax.com/showthread.php?89958-Propeller-Education-Kit-Labs-Tools-and-Applications

jdeb8465
01-22-2012, 10:32 PM
thanks a buch ill check those links out right away:smile: