PDA

View Full Version : Chatter Has any one bought any thing from this web site www.smtmax.com/



sam_sam_sam
01-20-2012, 10:35 PM
How good are their products and their customer service

I would like some feed back please


http://www.smtmax.com/index.php

Franklin
01-20-2012, 11:57 PM
What are you planning to buy?

Erik Friesen
01-21-2012, 01:38 AM
I bought a smt oven from them. It works fine. Its no $3k+ machine, but it does the job ok.

sam_sam_sam
01-21-2012, 02:18 AM
This is what I have in mind




http://www.smtmax.com/detail.php?id=196

tonyp12
01-22-2012, 08:45 PM
I guess you have to figure out if it's worth $50 more than this. (maybe?)
http://www.mpja.com/Rework-Station-Hot-Air-for-SMD-Replacement/productinfo/16121+TL/

RickB
01-22-2012, 10:25 PM
sam_sam_sam:

Filters and nozzles will have to be replaced periodically depending on the amount of usage. Be certain of the cost and easy availability before buying. If you do buy, order extra filters and tips at the same time.

sam_sam_sam
01-22-2012, 11:29 PM
I want thank every one who has reply to this post

Peggyjags
05-28-2013, 11:35 PM
I just recd a $60 vacuum tweezers for the application of crystals. The vacuum was made by SMT max but was ordered through Dreamtime Creations.
I hope there was some type of mistake. The item arrived dirty, the hoses are too short and won't stay connected. There were no directions. I'm too upset tonight to even try to turn it on. I have orders to fill and this mess is a major setback..
I sent an email to Dreamtime Creations and will follow up tomorrow. This is a mess!

NWCCTV
05-28-2013, 11:59 PM
You could spend a little more and get a 4 in 1 set up. I have one and am happy with it. http://www.ebay.com/itm/4-IN-1-X-TRONIC-9020-XTS-HOT-AIR-REWORK-SOLDERING-IRON-STATION-FUME-EXTRACTOR-/110969755108?pt=LH_DefaultDomain_0&hash=item19d65015e4