PDA

View Full Version : Unsolved DAQ PAC data logging project by Ryan David



Sprintboat Racer
12-19-2011, 03:15 PM
I am a poor racer that is interested in the data logger that Ryan developed in a contest. Hopefully Ryan or someone knowing him will tell him about me! My contact info is Ron Domoe. 775 267-0514 or rdomoe@charter.net.
Thanks for looking.

Microcontrolled
12-19-2011, 04:17 PM
No one has a clue what you are talking about. Please give some more references, or at least the name of the contest.

Publison
12-19-2011, 05:00 PM
I have a clue as to what he is talking about. :tongue:

Ryan placed second in the Propeller Design Contest. Unfortunately, there is no contact information.

http://www.parallax.com/Resources/ApplicationsContests/Contests/200910PropellerContest/DAQPacAutomotiveDataLogger/tabid/849/Default.aspx

(http://www.parallax.com/Resources/ApplicationsContests/Contests/200910PropellerContest/DAQPacAutomotiveDataLogger/tabid/849/Default.aspx)

Sprintboat Racer
12-19-2011, 09:20 PM
It seems a shame to go through all that effort and not use it! Hopefully ry.david will see this.

Mplex
05-16-2013, 02:38 PM
Hi ,
Is there anybody who have build Ryan David 's datalogger ?
Would love to hear from him or from other people who have build it !
Is there a PCB layout for it or need it to be redesigned ?

Klaas

Publison
05-16-2013, 09:55 PM
Hi ,
Is there anybody who have build Ryan David 's datalogger ?
Would love to hear from him or from other people who have build it !
Is there a PCB layout for it or need it to be redesigned ?

Klaas

Welcome to to forums!

The post I linked to has Eagle Schematics and screen shots of the board. From that you should be able to create the same board.

We would love to hear back from Ryan, but alas, he has not posted in a few years.

Mplex
05-22-2013, 09:53 PM
Thank You for welcome , nice forum.
Perhaps a bit dumb but I don not see the eagle files in that link , only a pdf and spin files.
is there possibly another source for the PCB eagle files?
I have the intention to build this project and Board layout should save me a lot of work :-)

Regards Klaas