Can a BS2P control SPI

[HardwareWizard]

Can i use a bs2p to be the master on an SPI interface.

if so is there an example out there?

i would like to interface to either an ISD1700 or ISD15100 series chipcorders using SPI

[Mike Green]

Yes. Look at the chapters on the SHIFTIN and SHIFTOUT statements in the on-line help or the BASIC Stamp Syntax and Reference Manual. There are all sorts of examples of the use of any Stamp as an SPI master using these and HIGH / LOW to control the chip select line.

There are other examples in the StampWorks Manual and a number of Nuts and Volts Columns, all on Parallax's website. Start with the Resources tab on the main Parallax webpage.

[HardwareWizard]

Thanks thats the nudge i needed

[sam_sam_sam]

You might want to look at this Data Sheet

http://www.nuvoton.com/NR/rdonlyres/FD3AA661-AE87-4327-9967-F01C538BAC97/0/ISD4004.pdf

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
··Thanks for any·http://forums.parallax.com/images/smilies/idea.gif·that you may have and all of your time finding them http://forums.parallax.com/images/smilies/smile.gif

·
·
·
·
Sam