PDA

View Full Version : Basic stamp power requirments


tgraz34
03-07-2010, 01:29 AM
I know that the bs2 requires 5V regulated on pin 21. But my voltage regulater only puts out 4.97V, will my bs2 still function properly?
hover1
03-07-2010, 01:45 AM
Yes. I will take voltages between 4.5 and 5.5 on Pin 21.

Jim
Mike Green
03-07-2010, 02:01 AM
The same answer applies to the Stamp as to your LCD question.