PDA

View Full Version : Sensor & Wireless Transmitting



flyfish
02-26-2010, 01:42 AM
Hello!

I'm doing a project with a sensor ( hm55b module) and a parallax rf transceiver and receiver. I'm using them connected to two boards. I'm very happy with the code supplied on·the parts'·websites, but I would like it if I could·send the sensor data wirelessly from the one computer to the other. I would be very·grateful if someone could point me in the right direction.

Post Edited (flyfish) : 2/25/2010 7:02:34 PM GMT

Mike Green
02-26-2010, 02:09 AM
Look at the existing sample code for the RF transceiver and for the compass. The two pieces of sample code: 1) read from the compass into variables and: 2) transmit one or more variables from one Stamp to another. You just have to combine the two. If you have specific questions as you go along, ask.

flyfish
02-26-2010, 03:27 AM
Mike Green said...
Look at the existing sample code for the RF transceiver and for the compass. The two pieces of sample code: 1) read from the compass into variables and: 2) transmit one or more variables from one Stamp to another. You just have to combine the two. If you have specific questions as you go along, ask.
OK, great! That helps a lot actually.