PDA

View Full Version : modify serin command



Ruefy
02-23-2010, 03:46 PM
Hi all.
My Name is Daniel from Switzerland and I am new in that forum.

In order to read serial TTL data from external device, I need to set the serout format to B9600,E,9,1.
Is it possible to do this with my BS2px?

Thanks for any answer.
Daniel

stamptrol
02-23-2010, 08:16 PM
Welcome to the Forums,

The BS2px can handle 9600 baud just fine, but 9 data bits will be a major source of irritation. The usual settings are for 96008N1 or 96007E1.

What kind of device are you interfacing with? Sounds like a modem. Is there a chance of changing its byte size to 8 or 7 bits?

Cheers,

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Tom Sisk

http://www.siskconsult.com

Ruefy
02-23-2010, 10:22 PM
Hi Tom.
Thanks for Your reply.
Unfortunately there is no chance to change or adust on the sending device. It is a rc duplex system from Jeti http://www.jetimodel.cz/index.php?page=product&id=34.
I found out in some forums, that is one of a possible way (without using of a microcontroller) to get correct data from that device.
Best regards.
Daniel