PDA

View Full Version : relay with the basic stamp bs2



tedroberson
02-17-2010, 06:57 AM
Hi , couldˇanyone send me any info. thatˇthey may have on controlling a relay with the basic stamp bs2.
Thanks for your time.

Post Edited By Moderator (Joshua Donelson (Parallax)) : 2/17/2010 12:18:55 AM GMT

Franklin
02-17-2010, 07:01 AM
You could start by adding a subject with the pencil icon in the upper right of your post. Also include as much information with your question as you can like how big a relay, do you already have the relay and if so what does it take to activate it (voltage and current). This will help us help you.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen

Mike Green
02-17-2010, 07:52 AM
Go to the main Parallax webpage and click on the Resources tab.ˇ Near the bottom of the list you'll get, you'll see a link for Nuts and Volts Columns.ˇ Click on that and you'll get the index for the Columns.ˇ #6 discusses controlling relays, solenoids, and small motors with a BS2 using switching transistors and Darlington transistor arrays.
ˇ