PDA

View Full Version : Bluetooth Module AND Basic Stamp



mota_puma999
01-28-2010, 10:09 AM
Hi!!!!!
I am a student, and i need to do a project using bluetooth and a BASIC STAMP microcontroller... but i do not know anything about BASIC STAMP controller nor the bluetooth module..

Some can tell me where can i start to learn about this?
Thanks

dandreae
01-29-2010, 02:09 AM
I suggest reading the Easy Bluetooth documention.· There is information and sample programs for the BASIC Stamp.· Here is a link for more information:

http://www.parallax.com/Store/Accessories/CommunicationRF/tabid/161/CategoryID/36/List/0/Level/a/ProductID/550/Default.aspx?SortField=ProductName%2cProductName

Check under the "Downloads and Resources" section.

Dave

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Dave Andreae

Parallax Tech Support·

Mike Green
01-29-2010, 02:27 AM
You will need to learn about programming the BASIC Stamp. A good place to start is the "What's a Microcontroller?" tutorial and the "BASIC Stamp Syntax and Reference Manual".

www.parallax.com/tabid/440/Default.aspx (http://www.parallax.com/tabid/440/Default.aspx)
www.parallax.com/tabid/535/Default.aspx (http://www.parallax.com/tabid/535/Default.aspx)

rekk1986
01-30-2010, 10:45 AM
I have some information for you about the BASIC Stamp here. A BASIC Stamp is a single-board computer that runs the Parallax PBASIC language interpreter in its microcontroller. The developer's code is stored in an EEPROM, which can also be used for data storage. The PBASIC language has easy-to-use commands for basic I/O, like turning devices on or off, interfacing with sensors, etc.