PDA

View Full Version : Using the new Pressure Sensor (VTI SCP1000 #27928) with a basic stamp.



markuster
10-22-2009, 10:27 PM
Hi,


The new Pressure Sensor from Parallax has a very good Pressure resolution: 1.5 Pa

And I would like to use it with my Basic Stamp.

Do you have the source code for B.Stamps ?

Thanks, Mark

Franklin
10-22-2009, 11:37 PM
did you look here? www.parallax.com/Store/Sensors/PressureFlexRPM/tabid/177/CategoryID/52/List/0/Level/a/ProductID/591/Default.aspx?SortField=ProductName%2cProductName (http://www.parallax.com/Store/Sensors/PressureFlexRPM/tabid/177/CategoryID/52/List/0/Level/a/ProductID/591/Default.aspx?SortField=ProductName%2cProductName)

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen

James Long
10-22-2009, 11:49 PM
Franklin said...
did you look here? www.parallax.com/Store/Sensors/PressureFlexRPM/tabid/177/CategoryID/52/List/0/Level/a/ProductID/591/Default.aspx?SortField=ProductName%2cProductName (http://www.parallax.com/Store/Sensors/PressureFlexRPM/tabid/177/CategoryID/52/List/0/Level/a/ProductID/591/Default.aspx?SortField=ProductName%2cProductName)


Yep...I know he did...there is no useful information on that page yet. The Only code is for the Propeller, and even that is a binary......not a spin file.

Chris Savage is working on the code........I know...because I asked a week ago.

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer

Lil Brother SMT Assembly Services (http://www.lil-brother.com)

Please note: Due to economic conditions the light at the end of the tunnel will be turned off until further notice. Thanks for your understanding.

Chris Savage
10-23-2009, 12:03 PM
Yes, code is on its way for both the BASIC Stamp and Propeller.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage

Parallax Engineering
50 72 6F 6A 65 63 74 20 53 69 74 65 (http://www.savagecircuits.com)
·

James Long
10-23-2009, 12:12 PM
Chris Savage (Parallax) said...
Yes, code is on its way for both the BASIC Stamp and Propeller.


Hey...we understand you are working hard to get it done........I know everyone here would rather see it later and right, rather than earlier and wrong.

No pressure.......from me at least. http://forums.parallax.com/images/smilies/smilewinkgrin.gif

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer

Lil Brother SMT Assembly Services (http://www.lil-brother.com)

Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits (http://www.savagecircuits.com). Learn to build your own Gizmos!

Chris Savage
10-24-2009, 11:42 PM
Thanks James...I will be working on code through all of next week. I would be at it this weekend, but the release of Windows 7 means I have a lot of work to do at home here just keeping PCs running.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage

Parallax Engineering
50 72 6F 6A 65 63 74 20 53 69 74 65 (http://www.savagecircuits.com)
·

James Long
10-25-2009, 12:14 AM
Chris Savage (Parallax) said...
Thanks James...I will be working on code through all of next week. I would be at it this weekend, but the release of Windows 7 means I have a lot of work to do at home here just keeping PCs running.


Ha.....I wouldn't go to Win 7 for two years. Takes about that long for all the consumer debugging to find all the problems. I guess if you have Vista, it's the lesser of two evils. I hate Vista, that is why I'm still running XP Pro.

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer
Lil Brother SMT Assembly Services (http://www.lil-brother.com)

Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits (http://www.savagecircuits.com). Learn to build your own Gizmos!

Chris Savage
10-25-2009, 12:29 AM
We have PCs here of every flavor and OS. But a few have been suffering from Vista and need a change of pace. The trick is to try not to upgrade too many things at once.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage

Parallax Engineering
50 72 6F 6A 65 63 74 20 53 69 74 65 (http://www.savagecircuits.com)
·

James Long
10-25-2009, 12:38 AM
Chris Savage (Parallax) said...
We have PCs here of every flavor and OS. But a few have been suffering from Vista and need a change of pace. The trick is to try not to upgrade too many things at once.


Hey, if you have Vista, I don't blame you for upgrading. I wish you luck. If this upgrade is anything like Vista, I will be looking for a different OS, or going to MAC (Did I say that??)

My wife's laptop is Vista, and it has been a problem since the day we bought it.

How about keep us informed of problems....that way I'll know if it is worth it.

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer
Lil Brother SMT Assembly Services (http://www.lil-brother.com)

Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits (http://www.savagecircuits.com). Learn to build your own Gizmos!

Jaime
11-12-2009, 08:51 AM
·Chris: I am waiting for the BAsic Stamp code for this new sensor I am eager to play around with this sensor this is something I wanted to do since a long time when I used to climb high mountains in Mexico all the time I wanted to check the atmospheric pressure at high alttitudes and all time I had problems to get a toy like this.



appreciate your technical assistance



PS: you can reach ne at: microwaveteach@hotmail.com (mailto:microwaveteach@hotmail.com)

schelled
09-20-2011, 07:12 PM
Can I revive this thread...has somewhat written some code for the 27928 sensor for the basic stamp yet??

Chris Savage
09-20-2011, 08:44 PM
Hello, another customer posted some code and information at the following link: http://www.maxentropy.net/stamp/SCP1000/scp1000.htm

schelled
09-21-2011, 04:21 PM
Hello, another customer posted some code and information at the following link: http://www.maxentropy.net/stamp/SCP1000/scp1000.htm

Thanks Chris

Moskog
03-11-2012, 01:07 PM
I cant find this sensor no more in the store......

Franklin
03-11-2012, 04:38 PM
I cant find this sensor no more in the store......
http://www.vti.fi/en/support/obsolete-products