PDA

View Full Version : Codes for IR transmitter that was on the freebie table at UPEW



John Abshier
07-17-2009, 06:00 AM
Using the IR Kit written by Bob Belleville. I determined that it is a NEC compatible. Codes are attached.

John Abshier

Bamse
07-17-2009, 10:02 PM
Awesome, do you have a Spin code example ?
Or maybe there is a Propeller Object available ?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[ ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[ ] OK, I got my resistors hooked up with the LEDs.
[X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[ ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[ ] I dream in SX28 assembler...

/Bamse

John Abshier
07-17-2009, 10:13 PM
http://obex.parallax.com/objects/37/

John Abshier

Bamse
07-17-2009, 10:34 PM
Thanks...

I'm going to give it a try tonight...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

Experience level:
[ ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
[ ] OK, I got my resistors hooked up with the LEDs.
[X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
[ ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
[ ] I dream in SX28 assembler...

/Bamse