PDA

View Full Version : Documentation for the Propeller Proto Board USB



RogerInHawaii
07-11-2009, 09:38 AM
I just purchased the Propeller Proto Board USB. Is there any documentation for it that shows the entire layout, which holes are connected to what pins, which holes constitute the available layout area, etc?

Bill Henning
07-11-2009, 09:48 AM
Click on the download links on the right (about half way down the page) at


http://www.parallax.com/Store/Microcontrollers/PropellerDevelopmentBoards/tabid/514/CategoryID/73/List/0/Level/a/ProductID/509/Default.aspx?SortField=ProductName%2cProductName
(http://www.parallax.com/Store/Microcontrollers/PropellerDevelopmentBoards/tabid/514/CategoryID/73/List/0/Level/a/ProductID/509/Default.aspx?SortField=ProductName%2cProductName)


RogerInHawaii said...
I just purchased the Propeller Proto Board USB. Is there any documentation for it that shows the entire layout, which holes are connected to what pins, which holes constitute the available layout area, etc?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
www.mikronauts.com (http://www.mikronauts.com) - my site 6.250MHz custom Crystals for running Propellers at 100MHz (http://mikronauts.com/products/mikronauts-625mhz-crystal/)
Las (http://mikronauts.com/products/las-largos-lmm-assembler/) - Large model assembler for the Propeller Largos (http://mikronauts.com/products/largos/) - a feature full nano operating system for the Propeller
Morpheus & Mem+ (http://mikronauts.com/products/morpheus/) Advanced dual Propeller SBC with XMM and 256 Color VGA
Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full