PDA

View Full Version : Prop Webinar with Chip - Thank you



Timothy D. Swieter
03-18-2009, 08:10 AM
Just a note to Jeff and Chip for the Propeller Webinar - thank you! The webinar was great and it is so cool to connect other users from around the world and to share in some discussions.

For those that haven't signed up for a webinar, do so. They are a good way to connect with the community on an audio (and visual) level. You can share ideas, ask any question you want and share advice. I haven't seen them yet, but I hear replays are available on-line for reference.

Thanks again Parallax for hosting the webinars and going the extra effort to connect with your customers.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Timothy D. Swieter, E.I.
www.brilldea.com (http://www.brilldea.com) - Prop Blade, LED Painter, RGB LEDs, 3.0" LCD Composite video display, eProto for SunSPOT
www.tdswieter.com (http://www.tdswieter.com)

Jeff Martin
03-18-2009, 09:25 AM
Thanks Timothy. We appreciate you joining and participating in today's webinar.

The videos from last weeks session should be available tomorrow afternoon, with todays webinar videos arriving by Thursday noon or earlier.

We really enjoyed today's meetings; plenty of great questions were asked and answered. It's a real joy to connect with everyone this way and the results should be very helpful for all who watch the recordings.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
--Jeff Martin

· Sr. Software Engineer
· Parallax, Inc.

Kye
03-18-2009, 09:45 PM
Yes that was fun.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Nyamekye,

Sapieha
03-18-2009, 10:29 PM
Hi Kye.

For them that have posiblity to talk with Chip.
On my end not If I wil register to it .... it was ... Sesion Full

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Nothing is impossible, there are only different degrees of difficulty.
For every stupid question there is at least one intelligent answer.
Don't guess - ask instead.
If you don't ask you won't know.
If your gonna construct something, make it·as simple as·possible yet as versatile as posible.


Sapieha

Jeff Martin
03-19-2009, 05:08 AM
Hi folks,

the first of the webinar videos are now available. The sessions from Chip's should be there within the next 24 hours.

http://www.parallax.com/tabid/766/Default.aspx


▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
--Jeff Martin

· Sr. Software Engineer
· Parallax, Inc.

Timothy D. Swieter
03-19-2009, 05:56 AM
Kye - it was nice to hear you on the phone and to hear what projects you are doing!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Timothy D. Swieter, E.I.
www.brilldea.com (http://www.brilldea.com) - Prop Blade, LED Painter, RGB LEDs, 3.0" LCD Composite video display, eProto for SunSPOT
www.tdswieter.com (http://www.tdswieter.com)

beebs
03-19-2009, 09:07 AM
I'd like to officially chime in and say thanks as well.
I really look forward to participating in or watching the archived versions of future sessions.
The informal, conversational "zigzag" tone brings up topics that might not come up otherwise.
These first two have been great.
I've been silently lurking on the forums for the last several months and I'm constantly impressed by the Parallax/Propeller community, it's truly unique.
I'm anxious to get more involved and become a contributing member.

Mike Huselton
03-19-2009, 09:33 AM
Just One Thing...

Who schedules these things? By the time I hear (actually, read) about it, these things are always full.

I guess I have to be quicker on the draw...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
JMH

Timothy D. Swieter
03-19-2009, 09:37 AM
Maybe the webinar releasing/opening of classes can be announced via the Parallax Tweeter feed? Some people (myself included) rarely make it to the Parallax main page or into the store. I do subscribe to the Tweeter feed. Most of the information I get is on the forum here and sometimes I don't even see the announcements forum because I link right into the Propeller thread.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Timothy D. Swieter, E.I.
www.brilldea.com (http://www.brilldea.com) - Prop Blade, LED Painter, RGB LEDs, 3.0" LCD Composite video display, eProto for SunSPOT
www.tdswieter.com (http://www.tdswieter.com)

Jeff Martin
03-19-2009, 09:47 AM
Timothy D. Swieter said...
Maybe the webinar releasing/opening of classes can be announced via the Parallax Tweeter feed? Some people (myself included) rarely make it to the Parallax main page or into the store. I do subscribe to the Tweeter feed. Most of the information I get is on the forum here and sometimes I don't even see the announcements forum because I link right into the Propeller thread.


Good idea, Timothy.· We'll announce it on the Tweeter feed as well.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
--Jeff Martin

· Sr. Software Engineer
· Parallax, Inc.

Mike Huselton
03-19-2009, 09:52 AM
Brilliant idea, Tim!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
JMH

Post Edited (James Michael Huselton) : 3/19/2009 3:02:03 AM GMT

Cluso99
03-19-2009, 11:34 PM
Thanks for posting the clips.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Links to other interesting threads:

· Home of the MultiBladeProps: TriBladeProp (http://forums.parallax.com/showthread.php?p=786418), SixBladeProp (http://forums.parallax.com/showthread.php?p=780033), website (Multiple propeller pcbs) (http://bluemagic.biz/cluso.htm)
· Prop Tools under Development or Completed (Index) (http://forums.parallax.com/showthread.php?p=753439)
· Emulators (Micros eg Altair, and Terminals eg VT100) - index (http://forums.parallax.com/showthread.php?p=778427)
· Search the Propeller forums (via Google) (http://search.parallax.com/search?site=parallax&client=parallax&output=xml_no_dtd&proxystylesheet=parallax&proxycustom=<HOME/>&ie=&oe=&lr=)

My cruising website is: ·www.bluemagic.biz (http://www.bluemagic.biz)·· MultiBladeProp is: www.bluemagic.biz/cluso.htm (http://www.bluemagic.biz/cluso.htm)

Paul_H
03-20-2009, 12:52 AM
One suggestion that you may have already seen - I understand and support the limited class size to aid interaction and personalize the content. When I see the event notice, they been filled (Im tooo slooooww http://forums.parallax.com/images/smilies/smile.gif ) Can they be live streamed the presentation also? Its free on several sites like Stickam or UStream.

thanks!

Paul

Sapieha
03-20-2009, 01:22 AM
http://forums.parallax.com/images/smilies/shakehead.gif·Hi.

Stil no video with Chip

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Nothing is impossible, there are only different degrees of difficulty.
For every stupid question there is at least one intelligent answer.
Don't guess - ask instead.
If you don't ask you won't know.
If your gonna construct something, make it·as simple as·possible yet as versatile as posible.


Sapieha