PDA

View Full Version : prize winning light controller



fixitman
01-10-2009, 12:11 PM
Recently I became intrested in Gregory Bartlet's design and based on the info on the web, I purchaced all the components to build this but I have a problem. I downloaded and paid for diptrace but none of the components were supported in the library. Can anybody provide this? And even full files ready to prototype? Thanks.

cimplex
01-10-2009, 01:13 PM
You may probably have to make your own parts, not that bad a task in DipTrace though.

However, take a look at AutoTRAX. After using and abandoning it for DipTrace, I have recently re-looked at it and find that it is now a much improved product, incorporating many of the features that made DipTrace so easy to use. Pricing appears roughly equivalently cheap.

I also noticed that development on DipTrace seems to have stopped as of almost a year ago, while releases of AutoTRAX seem to be current and ongoing.

-Joe

fixitman
01-10-2009, 01:34 PM
but it is so much easier if sombody can send me these files. And if anybody can, Please send them to me. I cannot understand how to edit library files yet.


Post Edited (fixitman) : 1/10/2009 5:40:17 AM GMT

Erik Friesen
01-10-2009, 10:11 PM
I happen to use diptrace. Do you have some particular component needs?

mynet43
01-19-2009, 07:44 AM
I have a DipTrace Library for all of the Propeller versions.

If this is what you want, I'll be happy to supply.

Jim

fixitman
01-22-2009, 08:42 AM
I would very much like these files for the diptrace program. Do I need to list all the chips I need for this library or does anybody have the completed file for gregory Bartlett's Prop 128 light controller? If so can you post them here?

mynet43
01-22-2009, 11:07 AM
Here are the files for the three Propeller chips.

The file Surface_Mt (2 files) has the two prop surface mount chips as well as some other surface mount components.

The other file, P8X32A-D40 (1 file), contains the DIP version.

Let me know if you have questions.

Jim

mctrivia
01-22-2009, 11:43 AM
does anyone have the files for eagle?

fixitman
01-22-2009, 12:21 PM
thank you mynet that is 1 of 40 chips i need.Tomorrow I will post a list unless someone has a massive list of libraries to post.

TJHJ
01-22-2009, 11:34 PM
Eagle prop libary is on cadsofts website under downloads.

here is the link
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/parallax_propeller.lbr