View Full Version : help !!! i need the firmware for the interpreter chip

08-31-2008, 03:16 AM
hello http://forums.parallax.com/images/smilies/tongue.gif I need the firmware pbasic for PIC16C57C
to youse the program BASIC STAMP EDITOR V1.33

иииииииииии thanks

Mike Green
08-31-2008, 03:25 AM
It is not available. Parallax will sell you a pre-programmed PIC16C57 for about $12.
Parallax makes a lot of information and software available for free, but not the PBasic
interpreter, not the source of the editor nor the documentation for the interpretive code.

Post Edited (Mike Green) : 8/30/2008 8:30:50 PM GMT

08-31-2008, 02:04 PM
thank you !!!!

sorry...I wrote a new similar topic...

08-31-2008, 02:05 PM
to program the pic I can use a compiler?

08-31-2008, 09:44 PM
You can use any device/program that is used on other pic chips. You just won"t have a Basic Stamp

- Stephen

Mike Green
08-31-2008, 10:04 PM
Microengineering Labs sells a PICBASIC compiler. The regular version is comparable to the BS1 in terms of things it can do and the Pro version is comparable to the BS2. I have a copy and have used it in the past for projects where a Stamp couldn't be used (because of size, cost, number of pins, speed, etc.) As Franklin indicated, it's not the same as a Basic Stamp, but it's a well done mature product.

Chris Savage
09-01-2008, 11:09 AM
Your duplicate post was removed.

Chris Savage
Parallax Engineering