PDA

View Full Version : PINK help



mustybob
08-19-2008, 02:29 AM
I have a PINK mod and need to use the second serial port (port 0) for communication can this be done and how do I change it.

Thank you
musty

SRLM
08-19-2008, 02:42 AM
Take a look at the documentation:

http://parallax.com/Portals/0/Downloads/docs/prod/comm/30013-PINKdocs-v2.1.pdf

mustybob
08-19-2008, 05:04 AM
I think I am missing it, I do not see how to use port 0 in the doc's it talks about port 1 but my port 1 is fried

Thank you
musty

Mike Green
08-19-2008, 05:14 AM
I don't think you're missing anything. The documentation does not provide for switching to the other port.
I suspect the only way it can be done is to modify the firmware and you have no way of doing that.

Chris Savage
08-21-2008, 04:08 AM
That is correct…the firmware would have to be modified to do this and that port is already defined in the low-level firmware for debugging, so it cannot be easily switched even if you did have a way to modify the firmware.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Engineering