View Full Version : 912 Mhz transceiver and propeller
shmow
04-29-2008, 12:56 AM
Does anyoneˇhave anyˇcode examples forˇthis transceiver?
Cheers,
Shmow
Which transceiver?
Leon
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Amateur radio callsign: G1HSM
Suzuki SV1000S motorcycle
shmow
04-29-2008, 01:07 AM
It's the 912Mhz RF transceiver available from Parallax
Here's a link to the device I'm refering to:
http://www.parallax.com/Store/Accessories/Communication/tabid/161/CategoryID/36/List/0/Level/a/ProductID/440/Default.aspx?SortField=ProductName%2cProductName
Shmow
Dgswaner
04-29-2008, 05:01 AM
have look at this project http://forums.parallax.com/forums/default.aspx?f=21&m=260122 by Noris56
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"A complex design is the sign of an inferior designer." - Jamie Hyneman, Myth Buster
DGSwaner
Chris Savage
04-29-2008, 06:07 AM
Since the transceivers are really just a wireless serial device you can simply use the Full Duplex Serial object for communication. Of course, in any RF application it’s always a good idea to do some packet checking to make sure everything arrives where it should. If that if necessary in your application you can handle that outside of the serial object. Take care.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
Tom C
04-29-2008, 10:34 AM
Hi all,
Steve Norris at Norris Labs has successfully interfaced a Propeller to the 912MHz transreceiver.
Download and review the Propeller spin code at the following link:
http://www.norrislabs.com/Projects/RoboCam/index.html
Just a thought.
Regards,
TCIII
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
If you are going to sendˇa Robotˇto save the world, youˇbetter make sure it likes it the way it is!
Post Edited (Tom C) : 4/29/2008 3:39:51 AM GMT