PDA

View Full Version : Propeller Stickers for sale - Updated information



computer guy
01-13-2008, 07:02 AM
See website robot.tmcp.com.au/stickers/ (http://robot.tmcp.com.au/stickers/)

http://forums.parallax.com/images/smilies/hop.gif

Image of design attached.
Actual badge is 2cm x 2cm.

Information -
size: 20x20mm
Printing: Digital printing
Material: Transparent


Price -
$1.00AUD each
or
10 for $8AUD
or
100 for $70AUD


Postage -
Australia: $5.30
USA: $8.50 (Air mail)
UK: $10.00 (Air mail)
Others: Calculate Here (http://www1.auspost.com.au/pac/int_parcel_type.asp)

Buy some for your mum, your grandmother, or buy a truckload of these beautiful suckers to store in the attic. lol http://forums.parallax.com/images/smilies/smile.gif

Payments will be via PayPal.

Has been approved by Parallax. Thank you Parallax. http://forums.parallax.com/images/smilies/smile.gif


175 stickers on request. http://forums.parallax.com/images/smilies/smile.gif


Here it is - see attachment.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 2/9/2008 6:46:28 AM GMT

computer guy
01-13-2008, 12:21 PM
91 views and not a single person interested. Wow that shocks me.
I know I like the idea of sticking these beautiful domed vinyl stickers on my next project. Think of the prop plug sticker only slightly larger.

Just post a reply if you would like some. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
01-13-2008, 01:14 PM
Ok, I have 4 stickers requested.
Off to a good start.

I need a minimum of 15 stickers sold in order to place the order.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

cgracey
01-13-2008, 02:15 PM
computer guy said...
91 views and not a single person interested. Wow that shocks me.
I know I like the idea of sticking these beautiful domed vinyl stickers on my next project. Think of the prop plug sticker only slightly larger.

Just post a reply if you would like some. http://forums.parallax.com/images/smilies/smile.gif


I think people would buy them if they were more affordable. Those stickers we put on PropPlugs cost us around $.40 and they are even made in the USA. If you could get yours made in China for $.05 and sell sheets of 100 for $20, that would probably work for everyone.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔


Chip Gracey
Parallax, Inc.

computer guy
01-13-2008, 02:19 PM
Chip,

Where did Parallax get them made?
I searched around for hours trying to find a cheap place to get them made.

I sent you a PM asking for permission to use the logo and name however as of yet I haven't received a response.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

cgracey
01-13-2008, 02:21 PM
Computerguy,

Maybe these guys would do a good job at a good price:

http://www.made-in-china.com/showroom/hxyw577/product-detailqbXmdZxHXnlY/China-Epoxy-Domed-Sticker-HX-DS-1-.html

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔


Chip Gracey
Parallax, Inc.

computer guy
01-13-2008, 02:28 PM
Ok thank you chip,

Will look at getting them for a lower price.
I wish people would speak up, If you think something is to expensive then say so. Thank you http://forums.parallax.com/images/smilies/smile.gif

Look forward to getting your response about the usage of the logo. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

cgracey
01-13-2008, 02:33 PM
computer guy said...
Chip,

Where did Parallax get them made?
I searched around for hours trying to find a cheap place to get them made.

I sent you a PM asking for permission to use the logo and name however as of yet I haven't received a response.

Thank you http://forums.parallax.com/images/smilies/smile.gif


Computerguy,

We get our dome labels from www.domelabels.com (http://www.domelabels.com).

Sorry about the permission request going unanswered. I might be confused, but I thought I forwarded your request to Ken Gracey (marketing) and he gave you permission, copying me on the return email. Sometimes I do lazy stuff like that.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔


Chip Gracey
Parallax, Inc.

computer guy
01-13-2008, 02:37 PM
So far I have not received permission from Ken.

"and he gave you permission"
Is that to say that he gave me permission or did you just assumed that he had.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
01-13-2008, 02:52 PM
Just checked my PM sent items, turns out that my messages where originally sent to Ken.
Sorry for that Chip.

Hopefully ken will respond by tomorrow.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

cgracey
01-13-2008, 03:02 PM
Computerguy,

I'm sorry that your request went unanswered. I·usually refer such things to Ken, but I must have read your email and then dropped the ball. I'm sorry about that. You have my permission, pending Ken's final approval. I only add that because Ken may want to write a sentence or two to make things a little more formal than this. I WILL talk to him about this tomorrow. For now, please proceed.

P.S.· I'm relieved you were not offended by my suggestion to lower the price. I hesitated to click 'submit'.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔


Chip Gracey
Parallax, Inc.

computer guy
01-13-2008, 03:12 PM
Chip,

That is alright, no offence taken. In fact I am pleased that you told me as now I don't feel as bad about people not requesting any.
Thank you for permission. Look forward to hearing from Ken.

I would personally pay $3.00 for a domed sticker, however obviously others wouldn't. Will lower the price as soon as I find another source that charges less.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Graham Stabler
01-13-2008, 09:31 PM
$3.00 is too expensive for a sticker IMHO, it's the kind of thing you normally get for free.

It may be a matter of bulk to get a good price, I'm suprized Parallax didn't grab this idea and do it themselves, they also have the shop to sell them in and could include them with orders.

Graham

Rayman
01-13-2008, 11:54 PM
This sticker looks really nice! I wanted some stickers for the enclosures I have at work. There, it's a pain to order things... It's hard to justify the ~30 minutes of paperwork required to put an order in for such a small thing... So, it's not really the price that's an issue for me... Still, if it were in the $1 range, I might use my own money to get a couple...

Also, I was originally thinking more along the lines of those metallized stickers you find on laptops. I think this would look nice on the black plastic or aluminum enclosures that I've been using...

computer guy
01-14-2008, 06:09 AM
Rayman,
If you get a 10 pack then they are only $2AUD each.
Unfortunately I have to sell them for this price as this is almost what I am paying for them.
The idea is that the small amount of profit from this will go towards buying more of them and hopefully selling them at a a slightly lower price.
At the moment I just don't have the money to start with.

Graham,
At the current time the price is as low as it can go, I am looking at getting them for a lower price however am still waiting for a response from several companies.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

OzStamp
01-14-2008, 06:22 AM
Hi computer guy.

I really do like the looks of the label.. it is a fresh looking design.

You need to get 1000's of them made before you get the price down to a respectable level.
Been there done it and aborted it.. the cost of shipping overseas for such a low cost item makes it really
an awkward and non profitable thing to do..

Sorry that we did not respond earlier .. like CHIP felt a little uncomfortable just saying blindly NO .

If you pursue this try a alu foil label they also look good and are way cheaper.
again qty dictates price.. than you need to add cost of shipping from China or wherever and than cost of shipping to
whoever wants them...
I really do think that this is better left to people like Parallax themselves.
They have the connections these day's in China and could possible get them made for next to nothing.
Offer them the design of your sticker and see what they say... if they take you up on it will donate a PropBus system to you..
I admire your desire to do something..

take care anthony have a great new year

cheers Ron Nollet Melbourne OZ

computer guy
01-14-2008, 06:43 AM
Thanks Ron,

I have decided to buy 500 of them, cheaper that way. Like you said http://forums.parallax.com/images/smilies/smile.gif
I have personally never liked alu foil labels, I am a domed person.

If this idea fails I might have to take you up on that offer.

Thanks Ron, have a great one too. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

OzStamp
01-14-2008, 07:53 AM
Hi Anthony

You want to barter...

We will start selling the PropBus system very soon here in OZ and th ebig wide world..its ready to go ..
also we will offer a complete empty PCB (panel of 11 small pcb's) local price will be $27.50

If you send me 15 stickers we will send you 1 off those empty pcb's ..
You can put your dip Propeller on it..

Just to get you going with your stickers..

let me know .

cheers ron

computer guy
01-14-2008, 08:35 AM
Hi Ron,

That sounds like a nice offer.
The only thing is I do need to get the money to pay for the stickers in the first place. Therefore I will not be able to take you up on your offer without selling 200 stickers.
as I have sold only 14 this seams unlikely. :-(

Thank you
Anthony

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Chris Savage
01-14-2008, 09:14 AM
I'm not sure on the legal use of the Parallax name/logo, however it seems to me you're missing the, "Inc." part of "Parallax Inc." Look at our Avatar logos.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support

computer guy
01-14-2008, 09:17 AM
Chris,

I got permission from both Chip and Ken.
Will add "inc" to the design then.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Beanie2k
01-14-2008, 03:13 PM
I live in the USA and although ~$1 isn't bad, paying $8.50 shipping is really out of the question for something that cheap. I realize you can't go any lower but the cold harsh business reality is there nonetheless.

BTW: It may not have been such a smart idea to post such a large high resolution image of your sticker. I myself am an ethical person and it would not be worth it to me to face the fires of hell over a sticker, but others ?????

computer guy
01-14-2008, 03:16 PM
Hi Beanie2K,

If you where to buy a ten pack the $8.50 might be worth it.
Just a thought, I don't know how others think. lol http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
01-14-2008, 08:55 PM
Beanie2K,

Think of it this way.

30 stickers at $1 = $30.00 + freight = $38.50
3 ten packs at $8 = $24.00 + freight = $32.50
or
40 stickers at $1 = $40.00 + freight = $48.50
4 ten packs at $8 = $32.00 + freight = $40.50
or
100 stickers at $1 = $100 + freight = $108.50
1 one hundred pack at $70 + freight = $78.50

So By ordering in Bulk you nearly remove the freight cost.
In fact with the third example you completely remove the shipping and some.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

MarkS
01-15-2008, 03:36 AM
I'll take 10. Need your PayPal address though...

Jen J.
01-15-2008, 06:39 AM
Propeller hat decal stickers have been ordered and are currently at the printer being produced.
We will be selling the stickers for $0.99 each and also including them in Propeller Kits.

I will keep you posted. They'll be available on our web site soon.
Cheers, JJ

Art Director
Parallax Inc.

(The decal will be die cut. The pink line indicates the cut line.)

Post Edited (Jen J. (Parallax)) : 1/14/2008 10:47:47 PM GMT

computer guy
01-15-2008, 06:54 AM
Thank you Mark,

Will provide PayPal address when minimum of 200 has been sold.
What country will these be shipped to?


Regards

Anthony
(Computer Guy)

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/14/2008 11:18:52 PM GMT

MarkS
01-16-2008, 03:32 AM
USA

computer guy
01-16-2008, 06:17 AM
Ok, thank you Mark.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
01-16-2008, 09:24 AM
ok to try and get these off the ground, if you request a ten pack in the next two hours I will throw in an extra five stickers free.

That's right 15 for the price of 10.

This deal only lasts 2 hours.
Ends 2:30PM (GMT +11) Daylight savings time.

You could always buy some for your dog. lol http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/16/2008 1:45:21 AM GMT

OzStamp
01-16-2008, 10:58 AM
Hi anthony

Put me down for 5 ten packs..

Ronald Nollet

James Long
01-16-2008, 11:00 AM
Anthony,

To get things·going,

Double my order. No need for the free anything.


James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L

Partner/Designer
Lil Brother LLC (SMT Assembly Services)

computer guy
01-16-2008, 11:01 AM
Ron,
Ok will do, you got in on the deal with 28 mins to spare. http://forums.parallax.com/images/smilies/smile.gif

James,
Thank you, will do. http://forums.parallax.com/images/smilies/smile.gif
Ok then, Thanks again. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

OzStamp
01-16-2008, 11:04 AM
Hi Anthony.
What we will do to help you as well is include 1 off your stickers with every PropBus system that we sell
here locally or overseas..(for free to the buyer of our Propbus system..)

People in Australia can ask for a CD on our PropBus system now.
just send us a PM

Cheers
Ron Nollet www.nollet.com.au

Post Edited (OzStamp) : 1/16/2008 4:04:57 AM GMT

computer guy
01-16-2008, 11:06 AM
Thanks Ron, it is much appreciated.
When you say "People in Australia can ask for a CD on our PropBus system now." what do you mean, please explain in more detail.

Do you want the extra 5 stickers in those ten packs?

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

OzStamp
01-16-2008, 11:09 AM
Hi Anthony.
See www.igniteautomation.com that is our PropBus system we developed that here in OZ.
It is ready to go.. just need to get a minute to put it on our website.
But we have a CD (industrial and educational now) that we are sending out to people here locally.
It contains all the data we have on the Propeller and the PropBus system..

cheers.. ron nollet mel oz

computer guy
01-16-2008, 02:33 PM
The website is up.
Please make orders via this website - - http://robot.tmcp.com.au/stickers/ Thank you.
If you are unable to then just send me a PM, however I would prefer that you use the site as it is easier for me to maintain consistency in details.

Please note that previous orders do NOT need to be reordered via the site. http://forums.parallax.com/images/smilies/smile.gif

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/17/2008 12:36:37 PM GMT

computer guy
01-17-2008, 07:41 PM
Please note, another 13 ten packs need to be sold before I can order them in.
Payments for previous orders and new orders will only be accepted after this has been reached.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/17/2008 9:33:20 PM GMT

computer guy
01-18-2008, 06:40 AM
Add 5 Offer: For a short time only, for only $1 we will add an extra 5 stickers for every 10 you order. - See website http://robot.tmcp.com.au/stickers/

Website contains a price calculator. http://forums.parallax.com/images/smilies/yeah.gif

http://forums.parallax.com/images/smilies/hop.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/18/2008 1:39:35 AM GMT

computer guy
01-20-2008, 03:33 PM
I have 130 on order I need at least 210 more to be requested before I can order them.

I hear "ten packs!".

Maybe you could buy some for your dog, probably make a good chew toy. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Superworms
01-21-2008, 03:16 AM
i'll buy some, problem is that i can only pay US cash, and besides , what is the current converison rate??

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Equipped with his 5 senses, man explores the world around and calls his adventure science
·
-Edwin Hubble
·

computer guy
01-21-2008, 05:57 AM
@Superworms
PayPal is the only payment method available.

The prices based on the current conversion rates are.

$0.87 USD each

$7.00 USD for ten

$61.50 USD for 100

Add 5 for $0.87 USD


@Everyone

The add 5 offer adds five to every ten pack ordered, for only $1 extra (total).

So 20 + "Add 5"

= 30 for $17.00 AUD

or

40 + "Add 5"

= 60 for $33.00 AUD

Use website calculator for more details.
Just enter quantity and weather you want to "Add 5", then click update.

http://robot.tmcp.com.au/stickers

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 1/20/2008 10:05:09 PM GMT

Jen J.
01-26-2008, 06:14 AM
For those interested,
The Propeller hat decals have arrived and are now available on our website. They are $0.99 each.
Printed on durable white vinyl they will look great on your laptop or even your car bumper.

Here is the link to the product page:
http://www.parallax.com/tabid/143/List/1/ProductID/497/Default.aspx

Have an excellent weekend.
Cheers, JJ

Mike_GTN
01-26-2008, 07:22 AM
@Parallax

Great news about your dome sticker things. A little curious why people would even think about rebranding laptops or car bumpers.
If I was selling stickers would not suggest in writing where they could or might be applied. Just imagine I paid for some of your stickers and lacking thought applied one to my laptop - I needed to remove this sometime later - On doing so I found your adhesive had removed part of the silver texture from the cover of my machine. Who do I blame? I'm certainly not implying this could happen. For sure this has already been tested.

I love the sound of a $0.99 sticker, curious what the shipping would be on one unit to the UK?

James Long
01-26-2008, 07:33 AM
Mike_GTN said...
@Parallax

Great news about your dome sticker things. A little curious why people would even think about rebranding laptops or car bumpers.
If I was selling stickers would not suggest in writing where they could or might be applied. Just imagine I paid for some of your stickers and lacking thought applied one to my laptop - I needed to remove this sometime later - On doing so I found your adhesive had removed part of the silver texture from the cover of my machine. Who do I blame? I'm certainly not implying this could happen. For sure this has already been tested.

I love the sound of a $0.99 sticker, curious what the shipping would be on one unit to the UK?
Ha...ha....you must not know the propeller guys very well......if it goes on....it will never come off (maybe from dirt, grim, abrasion...maybe theft....etc)

They guys are die hard. You must have not been around long enough......

These guys would keep the (propeller) sticker on their bumper clean, and not be able to see out the windshield. They don't care if removing it will take the chrome off the bumper, but the bumper better not rip the sticker (if they think it might....they will sell the car without the bumper).

I don't think you have to worry about that around here.

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L

Partner/Designer
Lil Brother LLC (SMT Assembly Services) (http://www.lilbro.mosquito.net.nz/index.html)

Post Edited (James Long) : 1/25/2008 11:39:30 PM GMT

Mike_GTN
01-26-2008, 07:43 AM
Hi James,

Exactly my point really. Wonder how many Laptops or car bumpers will appear on ebay as rebadged Propeller stuff.

Honest govenor is a real Sony Laptop, or is a real Ford Maverick Bumper (each one carefull owner, and low mileage http://forums.parallax.com/images/smilies/smile.gif

Regards

Mike.

computer guy
01-26-2008, 07:53 AM
My stickers (The domed ones) can be applied to any surface.
As for removal, I believe the adhesive is designed to be strong hold.
So I recommend only sticking them to finished projects.

Like -

Plastic/Metal enclosures of Home made equipment.
Large surfaces on robots (Top of metal chassis on BoeBot or Top of plastic enclosure on the Scribbler Robot).
etc.

Visit the website for prices http://robot.tmcp.com.au/stickers

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
01-31-2008, 07:44 AM
Last chance to request some of these beautiful stickers.

http://robot.tmcp.com.au/stickers

http://forums.parallax.com/images/smilies/hop.gif on in and request some now.

If minimum requirement is not met in the next week all previous requests will be cancelled and no new requests will be accepted. http://forums.parallax.com/images/smilies/cry.gif

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

tpw_man
02-01-2008, 09:35 AM
Is it possible for you to create a logo for silk-screening on a semi-professional pcb?

tpw_man

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
I am 1010, so be surprised!

computer guy
02-01-2008, 11:42 AM
tpw_man,

what kind of logo are you after. I can have a go at designing any vector image. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
02-02-2008, 01:03 PM
sales have picked up, however I still need another 20 ten packs to be requested before I can order them in.
With only days to go, so http://forums.parallax.com/images/smilies/hop.gif in now. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

tpw_man
02-02-2008, 10:08 PM
I mean a logo somewhat like the one you have for your avatar. If that is not possible, then the prop hat would be fine. Thanks!

tpw_man

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
I am 1010, so be surprised!

computer guy
02-03-2008, 05:51 AM
So you want the same graphic that I am using on the stickers but modified to work as a silk screen.
Is this correct?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 2/3/2008 6:51:45 AM GMT

computer guy
02-08-2008, 12:57 PM
These are only available for 1 more day so place requests now.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

tpw_man
02-09-2008, 04:38 AM
Yes.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
I am 1010, so be surprised!

computer guy
02-09-2008, 07:02 AM
@tpw_man

Ok I will make the vector graphic then. http://forums.parallax.com/images/smilies/smile.gif

@everyone

Only a few hours to go.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
02-09-2008, 11:12 AM
@tpw_man

What do you think of this?
What size(s) do you want it and what file format?

edit: I have attached some examples with different PCB solder mask colours.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Post Edited (computer guy) : 2/9/2008 4:28:53 AM GMT

computer guy
02-09-2008, 12:27 PM
The stickers are still available.
Check the first post of this thread for the design.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
02-09-2008, 02:38 PM
In order to be able to order them in, considering the low amount of requests I have decided to look at other options.
What would you think if the stickers where flat(no dome) transparent stickers?

Would the people with previous requests be happy with these?

Feedback would be helpful.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
02-10-2008, 05:49 AM
After receiving feedback about changing to flat stickers I have decided to try with domed again.

These are great stickers that can be applied to your projects to add colour and fill in those boring blank spots on PCB's or enclosures.

They are 20x20mm or 0.78".
Vinyl sticker with domed epoxy cover.
Like the badges you can get for your computer or the sticker on the prop plug.

The more you order the cheaper they are and with the "add 5 offer" 30 stickers can become 45 for only an extra $1.
Or 50 can become 75 for only an extra $1.

So make a request now - robot.tmcp.com.au/stickers/ (http://robot.tmcp.com.au/stickers/) http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Graham Stabler
02-10-2008, 06:05 AM
Might I suggest you explain to the supplier your situation, that you are buying for a group but can't quite make the price break, they can compare the profit they loose giving you the lower price for a smaller number with not getting an order at all, considering the non profit nature of your venture they may well aggree.

Graham

computer guy
02-10-2008, 06:52 AM
That would be a good Idea if I could get them to cut the price from 120.00 GBP to 35.83 GBP.
Which I doubt they will.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

OzStamp
02-10-2008, 07:05 AM
Hi Computer guy .

The issue here is time to setup for the label people.
Qty speaks volumes... no qty your wasting your time...sorry to be so blunt with it..
I really do like the idea of the dome sticker looks good.. but if you cannot make even a tiny profit
your really wasting your time Anthony..

Your saying GBP do you mean British Pounds... your not getting these made
all the way over in England...??

cheers ron

computer guy
02-10-2008, 07:14 AM
Yes over in the UK.
The company in the UK is the cheapest I could find.
All the other companies wanted plus $200 or more.

I am making a profit, only a small one but still a profit.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

tpw_man
02-10-2008, 08:33 AM
I do not know what file format I need. I am planning to use a service called ExpressPCB and their software. Sorry.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
I am 1010, so be surprised!

computer guy
02-10-2008, 08:41 AM
Do you know what size?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

Graham Stabler
02-10-2008, 09:21 AM
I didn't realize you had such a small percentage of the required orders. Or perhaps you didn't understand my suggestion.

Graham

computer guy
02-10-2008, 09:22 AM
Graham,

I understand your suggestion and yes I do need a lot more requests in order to make the required amount.

Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

tpw_man
02-10-2008, 11:05 AM
About 1 square inch.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
I am 1010, so be surprised!

computer guy
02-10-2008, 11:07 AM
Ok, If you PM me with your email address I will send you several formats some time later today. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
02-22-2008, 06:10 PM
Anyone else interested? http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

milw
03-05-2008, 12:15 AM
Sorry, I just found this thread! I'm in US but still interested in 10-20, are you still planning or have some in stock now? if so let me know your paypal addy.
cheers- Scott

computer guy
03-05-2008, 04:50 AM
Scott,

At the moment I am only after expressions of interest.
I will put your name on the list and let you know when enough people have requested some.


Thank you http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Sticker (http://forums.parallax.com/showthread.php?p=701193)

computer guy
03-21-2008, 09:48 AM
Bump, please check out information in first post. http://forums.parallax.com/images/smilies/smile.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Check out my robot using the propeller RECONAUTOR (http://robot.tmcp.com.au)
If you like my avatar then check this out Propeller Domed Stickers for sale (http://forums.parallax.com/showthread.php?p=701193)